Honeywell 800-06894 manual Disarming the System, Disarming the system and silencing alarms

SECURING THE PREMISES

Disarming the System

Select the “Disarm” icon or the “Off” key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire and burglary alarm sounds. During Entry Delay or when an Alarm Condition exists, the system will be disarmed as soon as the correct user code is entered on the touchscreen. Selecting the OFF key is not required. The entry beeps or alarm sound can be silenced by pressing any key however, it will restart in 10 seconds if the correct User Code is not entered. The READY indicator will light (if no alarms have occurred while armed) and the control will beep once to confirm that the system is disarmed.

**IMPORTANT**

If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

Disarming the system and silencing alarms

Armed: Stay

	Zones		System
Disarm	Message		Phone
10:18 AM June 8, 2010			More
			5000-100-056-V0
	Armed Stay
	1	2	3
	4	5	6
Enter Code:	7	8	9
Cancel	Clear	0
			5000-100-065-V0

1.Select the “Disarm” icon or depress the “Off” key. The system will beep once and display a keypad.

2.Enter a valid Code. The system will beep once and announce “Disarmed Ready to Arm”.

Note: If a valid user code is not entered or the Confirm icon has not been selected within 30 seconds, the system will return to the “home” screen and it will not be disarmed.

If an invalid User Code is entered, system will return to the home screen.

– 25 –