| QUICK VIEW OF SYSTEM FUNCTIONS |
SECURITY FUNCTIONS |
|
Checking system status: | Select “System” icon. |
To arm in STAY mode: | Select “Stay” icon then enter Code. |
To restart exit delay: | Select “Restart Exit Delay” icon. |
To arm in AWAY mode: | Select “Away” icon or depress “Away” key then enter |
| Code. |
To arm INSTANT: | Set “Delay” to ”Instant” . Select “Stay” or “Away” icon |
| or “Away” key then enter code. |
To arm if Quick Arm* is active: | Select “Stay” or “Away” icon or “Away” key followed |
| by Quick Arm tab on the touchscreen. |
* User code is not required if Quick Arm is active. | |
To disarm system and silence alarms: | Depress “Off’” key or “Disarm” icon and enter Code |
Note: During Entry Delay or when an Alarm Condition exists, the LYNX Touch can be disarmed by entering the User Code. Entering the OFF key is not required
To bypass a zone(s): | Select “Zones” icon |
To turn Chime mode on or off: | Select “Settings” icon |
MESSAGE CENTER
To record a message: ................................................. Select “Message” icon
VOLUME ADJUSTMENT
To adjust volume: | Select “Settings” icon |
To restore/unmute user announcements: | Select “Settings” icon |
SPEAKER PHONE OPERATION
To enter speaker phone mode: | Select “Phone” Icon |
To enable/disable (toggle) ringer: | Select “Settings” icon |
OTHER FUNCTIONS (accessible to the Master User only)
To set the time and date: | Select “Date Time” icon (on Master User Menu) |
To set scheduling: | Select “Schedules” icon (on Master User Menu) |
To activate/deactivate devices: | Select “Devices” icon (on Master User Menu) |
To add/delete a user code* (except Master Code): | Select “Users” icon (on Master User Menu) |
* Only the master code can be used to add or delete another user code. | |
To turn Test mode On or Off: | Select “Test” icon (on Master User Menu) |
To view system events: | Select “Events” icon (on Master User Menu) |
To program or delete “Follow Me” Reminders: | Select “Reminders” icon (on Master User Menu) |
– 9 –