Axis Communications Q6045-E user manual Set Up Email Recipients, Recipient Use with action

AXIS Q6045-E Mk II PTZ Dome Network Camera

Events

Recipient	Use with action	Notes
Email	Send Images	An email recipient can contain multiple email addresses. For
	Send Notification	more information about email recipients, see Set Up Email
		Recipients on page 41
	Send Video Clip
FTP	Send Images
	Send Video Clip
HTTP	Send Images
	Send Notification
	Send Video Clip
HTTPS	Send Images	Encrypted file transfer using HyperText Transfer Protocol
	Send Notification	Secure (HTTPS).
		Specify login information for the HTTPS server and validate
	Send Video Clip
		the server’s certificate. If there is a proxy between the Axis
		product and the HTTPS server, also specify the proxy settings.
Network Share	Send Images	A network share can also be used as a storage device for
	Send Video Clip	recorded video. Go System Options > Storage to configure
		a network share before setting up a continuous recording or
		an action rule to record video. For more information about
		storage devices, see Storage on page 52.
TCP	Send Notification

Set Up Email Recipients

Email recipients can be configured by selecting one of the listed email providers, or by specifying the SMTP server, port and authentication used by, for example, a corporate email server.

Note

Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.

To set up an email recipient using one of the listed providers:

1.Go to Events > Recipients and click Add.

2.Enter a Name and select Email from the Type list.

3.Enter the email addresses to send emails to in the To field. Use commas to separate multiple addresses.

4.Select the email provider from the Provider list.

5.Enter the user ID and password for the email account.

6.Click Test to send a test email.

To set up an email recipient using for example a corporate email server, follow the instructions above but select User defined as Provider. Enter the email address to appear as sender in the From field. Select Advanced settings and specify the SMTP server address, port and authentication method. Optionally, select Use encryption to send emails over an encrypted connection. The server certificate can be validated using the certificates available in the Axis product. For information on how to upload certificates,

see Certificates on page 46.

41