Axis Communications Q6045-E user manual Media Streams, How to Stream H.264, Axis Media Control AMC

Page 13

AXIS Q6045-E Mk II PTZ Dome Network Camera

Media Streams

Media Streams

The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the type you use.

The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream profiles. Other applications and clients can access video streams directly, without going via the Live View page.

How to Stream H.264

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared with the Motion JPEG format and as much as 50% more than the MPEG-4 standard. This means that much less network bandwidth and storage space are required for a video file. Or seen another way, much higher video quality can be achieved for a given bit rate.

Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are:

Unicast RTP

This unicast method (RTP over UDP) is used

 

 

 

for live unicast video, especially when it is

 

 

 

important to always have an up-to-date video

 

 

stream, even if some frames are dropped.

 

Unicasting is used for video-on-demand

RTP over RTSP

This unicast method (RTP tunneled over RTSP)

transmission so that there is no video traffic

on the network until a client connects and

 

is useful as it is relatively simple to configure

 

 

 

requests the stream.

 

firewalls to allow RTSP traffic.

 

 

 

Note that there are a maximum of 20

 

 

 

RTP over RTSP over HTTP

This unicast method can be used to traverse

 

simultaneous unicast connections.

 

firewalls. Firewalls are commonly configured

to

 

 

allow the HTTP protocol, thus allowing RTP to

 

 

be tunneled.

 

 

 

 

 

Multicast RTP

This method (RTP over UDP) should be used for live multicast video. The video stream is always

 

up-to-date, even if some frames are dropped.

 

 

Multicasting provides the most efficient usage of bandwidth when there are large numbers of

 

clients viewing simultaneously. A multicast cannot however, pass a network router unless the

 

router is configured to allow this. It is not possible to multicast over the Internet, for example.

 

Note also that all multicast viewers count as one unicast viewer in the maximum total of 20

 

simultaneous connections.

 

 

 

 

 

 

AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements.

Note

H.264 is licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

MJPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS Media Control in Internet Explorer in Windows.

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product.

13

Image 13
Contents Axis Q6045-E Mk II PTZ Dome Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q6045-E Mk II PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Network Connector Connectors and ButtonsFor technical specifications, see Hardware OverviewPower Button LED IndicatorsSD Card Slot Control ButtonGreen Steady when AC power input connected Midspan LED IndicatorsAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordLive View Go to Setup EventsControls on the Live View Click Use HttpsPTZ Controls Axis Media Control viewer toolbarTo show the manual trigger buttons in the Live View Autotracking on Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6045-E Mk II PTZ Dome Network Camera Basic Setup Set Up the ProductVideo Click Save to apply the new settingsVideo Stream Pixel Counter264 Stream ProfilesExposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsGo to Video Video Stream and select the Image tab Use Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Privacy Mask Under Overlay Settings, select Include textGo to Events Action Rules Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsAutotracking ConfigurationExclude Areas Max LimitsGuard Tour GatekeeperTo add a guard tour Advanced Osdi ZonesTour Recording LimitsControls Control Queue Operator Same as administrator but with lower priorityDetectors Set Up Motion Detection WindowsShock Detection Motion DetectionObject Removed Basic Video AnalyticsEnter/Exit Detector Object Counter Fence DetectorObservations Be activated See the online help for more informationGo to Setup Applications Install ApplicationApplications Application LicensesAxis Q6045-E Mk II PTZ Dome Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemActions Add RecipientsRecipient Types Recipient Use with action Set Up Email RecipientsCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourFormat SD Card Mount and Unmount SD CardNetwork Share MaintenanceTo add a network share Go to System Options Storage Click Network ShareSupport Plain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesCondensation in dome Storage and disk management problemsTechnical Specifications Installation aid Function/group Specifications Network SecurityInstallation MaintenancePower Function/group Specifications General CasingConnectors WeightPerformance Considerations ConnectorsM4.2
Related manuals
Manual 24 pages 14.82 Kb Manual 61 pages 17.77 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.