SVAT Electronics 2.4 GHz Wireless B/W Security System manual Using AC Power

Page 12

Setting Up-Monitor

Using AC Power

Plug one end of the provided power adapter into a wall outlet and the other end into the rear of the monitor. Note: Use the adapter labeled OUTPUT: 13.5V DC.

Turn on the monitor. The LED on the front of the monitor should light.

2 Fine Tuning

1 Adjust the video image using the V-HOLD, CONTRAST and BRIGHTNESS adjustment knobs on the back of the monitor, as needed.

2Place the monitor in a convenient location, then adjust its antenna so that the front (curved face) faces the room where the camera is set up. See "Orienting Units for Optimal Performance", on page 12.

10

Image 12

Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Setting Up-Camera Power SupplyFine Tuning Changing the Lens OrientationSetting Up-Monitor Using AC Power Setting Up-Other Applications Recording on a VCRNight Vision Audio OnlyAdjusting the Audio/Video Antennas Orienting Units for Optimal PerformancePlacing Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function Troubleshooting If you are not getting any signal at allCare and Maintenance Specifications MonitorConfiguration du moniteur SommaireIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Configuration AlimentationChanger l’orientation de l’objectif OptimisationLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Vision de Nuit Audio SeulementEmplacement Ajuster les antennes audio/vidéoMode Configuration d’origine Si vous n’avez aucun signal Dépannage