SVAT Electronics 2.4 GHz Wireless B/W Security System manual Setting Up-Camera, Power Supply

Page 9

Setting Up-Camera

1 Power Supply

The camera uses either batteries (AA-size) or household AC current.

To Load Batteries

1Open the battery compartment cover.

2 Insert batteries so their plus (+) and minus (-) ends are

facing as shown in the illustration.

3 Close the battery compartment cover. Make sure the battery compartment cover is locked securely.

Never mix old batteries with new ones.

Remove batteries from the camera if you do not plan to use it for a period of time.

Using AC Power

Plug one end of the provided power adapter into a wall outlet and the other end into the rear of the camera. Note: Use the adapter labeled OUTPUT: 9V DC.

Slide the POWER Switch to the ON position. The LED on the back of the camera should light.

7

Image 9

Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Power Supply Setting Up-CameraChanging the Lens Orientation Fine TuningSetting Up-Monitor Using AC Power Recording on a VCR Setting Up-Other ApplicationsNight Vision Audio OnlyAdjusting the Audio/Video Antennas Orienting Units for Optimal PerformancePlacing Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function If you are not getting any signal at all TroubleshootingCare and Maintenance Monitor SpecificationsSommaire Configuration du moniteurIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Alimentation ConfigurationOptimisation Changer l’orientation de l’objectifLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Audio Seulement Vision de NuitAjuster les antennes audio/vidéo EmplacementMode Configuration d’origine Dépannage Si vous n’avez aucun signal