SVAT Electronics 2.4 GHz Wireless B/W Security System manual Troubleshooting

Page 17

Troubleshooting

If you are not getting any signal at all

Check the power on the camera and monitor

Make sure power plugs are pushed all the way in

Check the CHANNEL switches on both camera and monitor are set to the same number

If the camera/monitor is powered by batteries, replace all batteries with new ones

If you can receive sound, but don't have images, or the images are poor, check the SCREEN ON/ OFF button on the front panel, or adjust the V-HOLD/ CONTRAST/BRIGHTNESS knob on the rear of the monitor

If the signal is poor, or there is interference

Adjust antenna orientation

Change the channel settings on both camera and monitor and make them the same

If there is a microwave oven in use in the path between the camera and monitor, remove the microwave oven or turn it off

Make sure the camera and monitor are within range (up to 300 feet)

Check the channel dipswitch positions on the monitor.

15

Image 17 SVAT Electronics 2.4 GHz Wireless B/W Security System manual Troubleshooting, If you are not getting any signal at all
Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Power Supply Setting Up-CameraChanging the Lens Orientation Fine TuningSetting Up-Monitor Using AC Power Recording on a VCR Setting Up-Other ApplicationsNight Vision Audio OnlyPlacing Adjusting the Audio/Video AntennasOrienting Units for Optimal Performance Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function If you are not getting any signal at all TroubleshootingCare and Maintenance Monitor SpecificationsSommaire Configuration du moniteurIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Alimentation ConfigurationOptimisation Changer l’orientation de l’objectifLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Audio Seulement Vision de NuitAjuster les antennes audio/vidéo EmplacementMode Configuration d’origine Dépannage Si vous n’avez aucun signal