SVAT Electronics 2.4 GHz Wireless B/W Security System manual Using the auto-sequence function

Page 16

Auto-Sequence Function for Multiple Location Monitoring

Note 1: The monitor will auto detect the receiving channels, and display them in sequence. When only one channel dip switch is in the ON position, the monitor will receive the channel continuously, without regard to the position of the 5th dip switch. If more than one dip switch remains on, the auto-sequence function will continue on those channels.

Note 2: When none of the dip switches are in the ON position, the monitor will automatically set the receiving channel to Channel 1.

Example:

Using the auto-sequence function:

If you have two wireless camera and their channels are set on CHANNEL 1 and CHANNEL 3, and you wish to monitor the two channels in sequence, you must slide up the first and third dip switches to the ON position (see the diagram on the right). If you wish these two channels to be alternated at eight-second intervals, slide the DIP 5 switch to the ON position. Leave it in the lower position for four-second channel change intervals.

Stopping the auto-sequence function:

To stop the auto-sequence function and lock on one channel, leave the dip switch for the channel you want to receive in the ON position. Slide the others to the lower position.

14

Image 16 SVAT Electronics 2.4 GHz Wireless B/W Security System manual Using the auto-sequence function
Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Setting Up-Camera Power SupplyFine Tuning Changing the Lens OrientationSetting Up-Monitor Using AC Power Setting Up-Other Applications Recording on a VCRNight Vision Audio OnlyOrienting Units for Optimal Performance Adjusting the Audio/Video AntennasPlacing Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function Troubleshooting If you are not getting any signal at allCare and Maintenance Specifications MonitorConfiguration du moniteur SommaireIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Configuration AlimentationChanger l’orientation de l’objectif OptimisationLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Vision de Nuit Audio SeulementEmplacement Ajuster les antennes audio/vidéoMode Configuration d’origine Si vous n’avez aucun signal Dépannage