SVAT Electronics 2.4 GHz Wireless B/W Security System manual Care and Maintenance

Page 18

Care and Maintenance

For best performance, don't touch the antennas unnecessarily

Keep all its parts and accessories out of young children's reach

Camera performances can be adversely affected by fingerprints or dirt on the lens surface. Avoid touching the lens surface with your fingers.

Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens.

Keep dry. Precipitation, humidity, and liquids, contain minerals that will corrode electronic circuits

Do not use or store in dusty, dirty areas. Moving parts may be damaged

Do not store in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics

Do not store in very cold areas. When the Wireless Security System warms up (to its normal temperature), moisture can form inside the case, which may damage electronic circuit boards

Do not attempt to open the case. Non-expert handling of the device may damage it

Do not drop , knock, or shake it. Rough handling can break internal circuit boards

Do not use harsh chemicals, cleaning solvents, or strong detergents when cleaning. Wipe with a soft cloth slightly dampened in a mild soap-and-water solution

If the Wireless Security System is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service

Operate this product using only the power supply included with it or provided as an accessory

Do not overload electrical outlets or extension cords as this can result in fire or electric shock

16

Image 18
Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Setting Up-Camera Power SupplyFine Tuning Changing the Lens OrientationSetting Up-Monitor Using AC Power Night Vision Setting Up-Other ApplicationsRecording on a VCR Audio OnlyAdjusting the Audio/Video Antennas Orienting Units for Optimal PerformancePlacing Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function Troubleshooting If you are not getting any signal at allCare and Maintenance Specifications MonitorConfiguration du moniteur SommaireIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Configuration AlimentationChanger l’orientation de l’objectif OptimisationLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Vision de Nuit Audio SeulementEmplacement Ajuster les antennes audio/vidéoMode Configuration d’origine Si vous n’avez aucun signal Dépannage