SVAT Electronics 2.4 GHz Wireless B/W Security System manual Hold Brightness Contrast

Page 7

Product Layout

1Volume/Power Control

2 Screen ON/OFF

Screen can be turned off for audio monitoring only.

3 Power Indicator LED

4 13.5V Power Adapter Plug

5 Channel Selection Dipswitches

Select the channel by setting the channel dipswitch to the ON position. The number 5 dipswitch sets the timer for the auto-sequence function (see "Auto-Sequence Function for Multiple Location Monitoring", on page 13 ).

Must select the same channel both on monitor and receiver.

6 Audio Output Jack (White)

7 Video Output Jack (Yellow)

8V-HOLD

9BRIGHTNESS

10 CONTRAST

11 2.4 GHz Audio/Video Antenna (Front ) Receives Audio/Video signals.

Caution: Antenna does not rotate freely through 360 degrees. (See "Orienting Units for Optimal Performance", on page 12)

12 Battery Compartment

5

Image 7 SVAT Electronics 2.4 GHz Wireless B/W Security System manual Hold Brightness Contrast
Contents Page Contents What You Get Product Layout OFF/ON/NIGHT Rear View Bottom View Monitor Front View Hold Brightness Contrast Setting Up Power Supply Setting Up-CameraChanging the Lens Orientation Fine TuningSetting Up-Monitor Using AC Power Audio Only Setting Up-Other ApplicationsRecording on a VCR Night VisionOrienting Units for Optimal Performance Adjusting the Audio/Video AntennasPlacing Auto-Sequence Function for Multiple Location Monitoring Using the auto-sequence function If you are not getting any signal at all TroubleshootingCare and Maintenance Monitor SpecificationsSommaire Configuration du moniteurIllustrations LED Infrarouges Illustrations Stabilité V-HOLD Alimentation ConfigurationOptimisation Changer l’orientation de l’objectifLe moniteur utilise des piles de taille C ou le courant AC Utilisation de l’alimentation AC Enregistrer sur un magnétoscope Audio Seulement Vision de NuitAjuster les antennes audio/vidéo EmplacementMode Configuration d’origine Dépannage Si vous n’avez aucun signal