Kenmore 530, 334 Temperatu re=Pressu re Relief Valve, ×plosion Hazard, Water Damage Hazard

Page 14

FitT&PvalveinsulationovervalveMakesurethattheinsulation.

doesnotinterferewiththeleveroftheT&Pvalve.

Secureallinsulationusingtape.

HOT WATER

Temperatu re=Pressu re Relief Valve

 

E×plosion

Hazard

/---\

• Temperature-pressure relief valve

 

 

must comply with ANSI Z2122

 

and ASME

code.

 

 

• Properly

sized

temperature-

 

pressure relief valve must be

 

installed in opening

provided.

DRAFT HOOD

 

TEMPERATURE-PRESSUI

_

RELIEF

VALVE

 

(OPTIONAL TOP T & P REL

 

VALVE NOT

SHOWN)

DISNCARGE PiPE

(DO NOT CAP OR PLUG)

DRAIN VALVE

-Can result in overheating and ezcessive tank pressure

• Can cause serious injury or death.

This heater is provided with a properly certified combination

temperature - pressure relief valve by the manufacturer.

The valve is certified by a nationally recognized testing laboratory

that maintains periodic inspection of production of listed

equipment as meeting the requirements for Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems,

ANSI Z21.22 and the code requirements of ASME.

If replaced, the valve must meet the requirements of local

codes, but not less than a combination temperature and

pressure relief valve certified as indicated in the above paragraph.

The valve must be marked with a maximum set pressure not

to exceed the marked hydrostatic working pressure of the water heater (150 psi = 1,035 kPa) and a discharge capacity not less than the water heater input rate as shown on the model rating plate.

For safe operation of the water heater, the relief valve must not be removed from its designated opening nor plugged.

The temperature-pressure relief valve must be installed directly into the fitting of the water heater designed for the relief valve.

Position the valve downward and provide tubing so that any discharge will exit only within 6 inches (153 mm) above, or at any distance below the structural floor, see Figure 16. Be certain

that no contact is made with any live electrical part. The discharge opening must not be blocked or reduced in size under

any circumstances. Excessive length, over 30 feet (9.14 m), or use of more than four elbows can cause restriction and reduce the discharge capacity of the valve.

No valve or other obstruction is to be placed between the relief valve and the tank. Do not connect tubing directly to discharge

drain unless a 6 inch air gap is provided. To prevent bodily injury, hazard to life, or property damage, the relief valve must be allowed to discharge water in quantities should circumstances

demand. If the discharge pipe is not connected to a drain or other suitable means, the water flow may cause property damage.

FLOOR DRAIN

FIGURE 16.

Water Damage Hazard

* Temperature-pressure relief valve discharge

pipe must terminate at adequate drain.

The Discharge Pipe:

•Shall not be smaller in size than the outlet pipe size of the valve, or have any reducing couplings or other restrictions.

•Shall not be plugged or blocked.

•Shall be of material listed for hot water distribution.

•Shall be installed so as to allow complete drainage of both

the temperature-pressure relief valve, and the discharge pipe.

•Shall terminate at an adequate drain.

•Shall not have any valve between the relief valve and tank.

Water temperature over 125°F (52°C) can cause severe burns instantly resulting in severe injury or death.

Children, the elderly, and the physically or mentally disabled are at highest riskforscald injury.

Feel water before bathing or showering.

Temperature limiting valves are available.

Read instruction manual for safe temperature setting.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operation Care and Maintenance Troubleshooting Parts List For Your SafetySafety instructions , installation Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.AImportant Definitions Fire Hazard Improper installation and use may result Property damageFire or Explosion Hazard Breathing Hazard Carbon Monoxide Gas12-13 CombustionAirandVentilationAppliances11-12 13-14ThankYouforpurchasingKenmorewaterheaterProperly ContractorsSqueeze Tube Additional Tools Needed When Sweat SolderingMaterials Needed USE for Water and GASPilot Thermopile Tubing TCO Closed Water SystemPilot Burner Removing the Old Water Heater Facts to Consider About Location Fire or Explosion Hazard MINInsulation Blankets Breathing Hazard Carbon Monoxide GasAllair from Inside Buildings Rgure Water PipingToxic Chemical Hazard Property Damage Hazard NotbeintroducedintothissystemLookatthetopofthewaterheaterThecoldwaterinletis PiPE INSULATiON Flue PiPEWater Damage Hazard Temperatu re=Pressu re Relief Valve×plosion Hazard Yo outdoors VentingProperty Damage Hazard Fire and Explosion Hazard RET,,,,LGas Piping Drafthood ChimneySediment Traps LINIONLACKPiPEScald injury. Consult Instruction Rnanual before Changing TemperatureIf you cannot reach your gas suppltar,call the fire Generator Temperature RegulationThermostat Tank Sediment Cleaning Vent System InspectionHousekeeping Temperature=Pressure Relief Valve OperationTEMPERATURE-PRESSURE DrainingOPENanearbyhotwaterfaucetandleaveopentoallowfor draining Drain Valve Washer ReplacementCLOSEthecoldwaterinletvalvetothewaterheater Strange Sounds Thermal Expansion TankExpansion Tank Sizing Draft Hood OperationMakenecessaryairsupplychangestocorrect Operational ConditionsOperational Conditions Leakage Checkpoints Fortheseinstructions, please see Figure Screw GAS Valve BackplateLocking TAB Tank Thermopile Sensor Torx Gas control valve or tank sensor failure Tllllil 153.334530150Ga,on l LIST, not a Packing ListPage 12YEARLIMITED Warranty on Water Heater MY-HOME

334, 530 specifications

The Kenmore 334,530 is a well-regarded appliance in the realm of portable air conditioning units, offering users an efficient cooling solution for both homes and office spaces. Known for its reliability and performance, this model blends advanced technology with user-friendly features to create a cooling experience that meets diverse needs.

One of the standout characteristics of the Kenmore 334,530 is its cooling capacity, rated at 14,000 BTU. This makes it suitable for medium to large-sized rooms, effectively cooling spaces up to 600 square feet. Users can expect rapid temperature drops, making it ideal for sweltering summer days when immediate relief is needed.

The unit features a sleek design that allows for easy portability. Equipped with rolling casters, the Kenmore 334,530 can be effortlessly moved from room to room, providing flexibility based on where cooling is needed most. The convenient window installation kit simplifies the setup process, allowing for a straightforward installation without the need for professional assistance.

Energy efficiency is another key highlight of the Kenmore 334,530. With an impressive Energy Efficiency Ratio (EER), this air conditioner is designed to minimize electricity consumption while maintaining powerful cooling performance. Users can stay cool without worrying excessively about their energy bills.

Additionally, the Kenmore 334,530 is equipped with a programmable thermostat and remote control, allowing users to customize their cooling experience. The programmable timer can be set to operate at specific times, ensuring the room is cool when needed while saving energy when it isn't. The user-friendly interface and digital display make adjustments quick and intuitive.

The unit also features multiple fan speeds and cooling modes, including a dehumidifying option that removes excess moisture from the air. This capability not only enhances comfort but contributes to a healthier indoor environment by preventing mold and mildew growth.

In terms of maintenance, the Kenmore 334,530 includes an easy-to-clean washable filter that captures dust and allergens, promoting cleaner air circulation. This filter is designed to be simple to access and maintain, ensuring ongoing efficiency and performance.

Overall, the Kenmore 334,530 stands out in the portable air conditioning market, offering a combination of power, efficiency, and convenience. Its thoughtful features and advanced technology make it an excellent choice for anyone seeking reliable cooling solutions in various settings.
Top Page Image Contents