Kenmore 153.331592, 153.331492 owner manual Materials Needed

EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE

IN 2 GALLONS

(7.6 LITERS) AND

5 GALLONS (18.9 LITERS) CAPACITY THROUGH LOCAL SEARS STORE

OR SERVICE CENTER.

WATER HEATER INSTALLATION KIT WITH

FLEXIBLE CONNECTORS FOR 3/4"

(19.05 ram) OR 1/2" (12.7 mm) THREADED OR COPPER PLUMBING AND FLEXIBLE WATER HEATER GAS CONNECTOR WITH FITTINGS.

METAL DRAIN PANS AVAILABLE

IN 20" (508 mm) DIAMETER FOR WATER HEATERS HAVING

A DIAMETER 18" (457 mm) OR LESS, 24" (610mm) DIAMETER FOR WATER HEATERS HAVING

A DIAMETER 22" (559 mm) OR LESS AND AVAILABLE IN 28"

(711 mm) DIAMETER FOR WATER HEATERS HAVING A DIAMETER

26" (660 mm) OR LESS.

BASIC TOOLS

You may or may not need all these tools, depending on your

type of installation. These tools can be purchased at your local Sears Store.

ADDITIONAL TOOLS NEEDED WHEN SWEAT SOLDERING

•Pipe Wrenches (2) 14" (356 mm)

•Screwdriver

•Tin Snips

•6'(1.82 m) Tape or Folding Ruler

•Garden Hose

•Drill

•Pipe Dope or Teflon Tape

SLOT-HEAD SCREWDRIVER

PHILLIPS SCREWDRIVER

ROLL OF TEFLON

TAPE (USE ONLY ON

WATER CONNECTIONS)

DRILL

TIN SNIPS

PIPE DOPE

(SQUEEZE TUBE)

USE FOR WATER AND GAS

CONNECTIONS

G

3/4" (19 mm) WIRE BRUSH