Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before
performing maintenance or cleaning the unit. Failure to do so could result
in electrlcal shock or personal Injury from vacuum cleaner suddenly
starting.
To replace the light bulb careful- ly insert securely
into slot. Replace lens cover.
Replace lens cover by inserting bottom tab of lens into slots then applying pressure to top tabs with a screwdriver.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical outlet. Lower handle to lay vacuum clean- er fiat.
Pry out light lens at slots by inserting screwdriver into slot, pushing down on the
lens and rotating the screwdriver handle toward unit.
Flat
A "popping" sound indicates lens is snapped properly in place.
Note: See PARTS AND FEATURES for bulb number.
!r ., CAUTION
Do not plug in or turn on until the vacuum cleaner is completely reassembled.
CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat from the bulb could overheat surrounding plastic parts.
Remove the light bulb by pulling straight out.
21