ADT Security Services 3000 manual 6LQJOH%XWWRQ3DJLQJ, DWFK.H\3DJLQJ

3DJLQJ)HDWXUH

6LQJOH%XWWRQ3DJLQJ

Your system may be set up so you can manually send a message to up to four pagers.
(pager no.)	6)%(=-7%61)(83%61

• Your installer programs the paging function key and the pager phone numbers.

• Pressing the paging keys sends the message		to the selected pager.
	9 9 9 – 9 9 9 9

• This message could mean “call home”, “call your office”, or any other prearranged meaning.

• See the Paging chart at the back of this manual for details of the paging setup for

	your system.
1.	Hold		2 seconds then press [1-4].
		pager key
	Press and hold the programmed Paging Key for at
	least 2 seconds (wait for beep), then press the pager			English￿￿￿￿￿￿￿￿Display: READY
	number (1-4)* representing the pager intended to
	receive the message.
2.	The recipient, on seeing the 999–9999 message, will
				Pager Display
	understand the prearranged meaning of this signal.

*If no number is pressed, the message is sent to pager 1.

/DWFK.H\3DJLQJ

You can program a schedule that causes a pager report to be sent if the system is not DISARMED by the scheduled time (see Scheduling section, event “03”). For example, a working parent might want a message to be sent to a pager if their child did not arrive home from school and disarm the system by a certain time.

If programmed, the message that is sent is: 7 7 7 – 7 7 7 7 .

– 27 –