)LUH$ODUP6\VWHP &RQWLQXHG
THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
Manually 1. Should you become aware of a fire emergency before your smoke or
Initiating heat detectors sense the problem, go to your nearest touchpad and
a Fire Alarm manually initiate an alarm by pressing the panic key assigned for FIRE emergency for 2 seconds. If a key pair has been assigned for fire, press both keys at the same time. Check on the next page and in the Panic Keys section on page 34 for further details.
2.Evacuate all occupants from the premises.
3.If flames and/or smoke are present, leave the premises and notify your local Fire Department immediately.
4.If no flames or smoke are apparent, investigate the cause of the alarm. The zone number(s) of the zone(s) in an alarm condition will be displayed at the touchpad.
Using the Panic
Key(s) Assigned
for FIRE
Emergency
A key or key pair may have been assigned for manually initiating a FIRE alarm. See the Panic Keys section on page 34 for key assignments.
For convenience, indicate the key or key pair assigned for fire below.
Individual Keys
A B C
seconds.
OR
Key Pairs
1 O F F
✱R E A D Y
3 S T A Y
Press the individual key assigned for fire for 2
and | ✱R E A D Y |
|
|
| |
|
|
|
|
| Press the key pair assigned |
and |
| # |
| ||
|
|
|
|
| for fire at the same time. |
|
|
|
| ||
and | # |
|
|
| |
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
* - 6 )
AC
ALARM
FIRE
CUSTOM DISPLAY TOUCHPAD | ENGLISH DISPLAY TOUCHPAD |
– 42 –