ADT Security Services 3000 6XPPDU\RI$XGLEOH9LVXDO1RWLILFDWLRQV, QJOLVK’LVSOD\7RXFKSDGV

6XPPDU\RI$XGLEOH9LVXDO1RWLILFDWLRQV

(QJOLVK’LVSOD\7RXFKSDGV

SOUND	CAUSE	DISPLAY
LOUD,	FIRE ALARM	FIRE is displayed; zone number of zone in
INTERRUPTED*		alarm is displayed. If a fire alarm is manually
Touchpad & Ext.		activated, zone number 95 will be displayed.
LOUD,	BURGLARY/AUDIBLE	ALARM is displayed. Zone number of zone in
CONTINUOUS*	EMERGENCY ALARM	alarm is also displayed.
Touchpad & Ext.
ONE SHORT BEEP	a. SYSTEM DISARM	a. READY indicator light comes on.
(not repeated)	b. SYSTEM ARMING ATTEMPT	b. Number of the open protection zone displayed.
Touchpad only	WITH AN OPEN ZONE.
	c. BYPASS VERIFY	c. Zone numbers of the bypassed protection
		zones are displayed (one beep is heard for
		each zone displayed). Subsequently, BYPASS
		is displayed.
ONE SHORT BEEP	a. SYSTEM IS IN TEST MODE	a. Opened zone numbers will appear.
(once every 40 secs)	b. LOW BATTERY AT A	b. BAT displayed with zone number of
Touchpad only	TRANSMITTER	transmitter.
TWO SHORT BEEPS	ARM AWAY	AWAY is displayed. Red ARMED indicator is lit.
Touchpad only
THREE SHORT	a. ARM STAY, NIGHT-STAY, OR	a. STAY or INSTANT is displayed. Red
BEEPS	INSTANT	ARMED indicator is lit.
Touchpad only		b. CHIME displayed; zone number of open
	b. ZONE OPENED WITH	protection zone will be displayed if the [✱]
	SYSTEM IN CHIME MODE.	key is pressed.
RAPID BEEPING	a. TROUBLE	a. CHECK displayed. Zone number of troubled
Touchpad only		protection zone is displayed.
	b. MEMORY OF ALARM	b. FIRE or ALARM is displayed; zone number
		of zone in alarm is displayed
	c. SYSTEM LOW BATTERY	c. BAT displayed with no zone ID number.
	d. EXT. SOUNDER WIRING FAIL	d. CHECK 70 is displayed.
SLOW BEEPING	a. EXIT DELAY WARNING	a. AWAY is displayed.
Touchpad only	b. ENTRY DELAY WARNING	b. Exceeding the entry delay time without
		disarming causes alarm.

* If a bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.

– 46 –