ADT Security Services 3000 manual 9LHZLQJ&XUUHQW’DWHDQG7LPH, 9LHZLQJWKH&XUUHQW’DWHDQG7LPH

	(Security Code)					6)%(=-7%61)(83%61
			9LHZLQJ&XUUHQW’DWHDQG7LPH
9LHZLQJWKH&XUUHQW’DWHDQG7LPH
The system lets you view its time and date setting.
	+[#] + [6] [3]
OR, press the function key (A, B, C, or D) for viewing
						English Display:			READY
	current date and time, if programmed.
A typical time/date display is shown.								8-1)￿(%8)		7%8
The display will remain on for about 30 seconds.								￿￿￿￿￿%1C￿￿￿￿￿￿￿￿
		“A”		“B” “C”	“D”
	If one of the above keys has been programmed for the date/time
	display feature, place a check mark in the box beneath that key.
6HWWLQJWKH’DWHDQG7LPH							-7%61)(
You can set the time and date by doing the following:
1.	+[#] +			[6] [3]
	(Security Code)						6)%(=83%61
2. Press [∗] when the time/date is displayed.
							8-1)(%8)			7%8
	A cursor appears under the first digit of the hour.
	To move cursor ahead, press [∗]. To go back, press [#].							￿￿￿￿￿41￿￿￿￿￿￿￿￿
						Current￿￿￿￿8-1)(%8)￿time4￿￿￿￿￿￿￿￿￿￿display7%8
	• Enter the 2-digit hour setting.
	• Enter the 2-digit minute setting.
	• Press [1] for PM or [2] for AM.
	• Enter the last two digits of the current year.
						Time/date editing display
	• Enter the 2-digit month setting.
	• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
	wait 10 seconds.

– 21 –