6\VWHP2YHUYLHZ
,QWURGXFWLRQ
Congratulations on your ownership of an ADT Partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today, and millions of premises are protected by ADT systems.
This system provides:
•Three forms of protection: burglary, fire* and emergency.
•At least one touchpad which provides control of system operation and displays the system’s status
•Various sensors for perimeter and interior burglary protection
•Smoke or combustion detectors* designed to provide early warning in case of fire. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a Customer Care Center.
*Commercial installations and some residential systems may not include fire protection – check with your installer.
6\VWHP%DVLFV
Burglary Protection
•There are four modes of burglary protection: Stay,
STAY: arms perimeter zones only and entry delay is on
INSTANT: same as STAY, except entry delay is off
AWAY: arms perimeter and all interior zones, entry delay is on
•You can BYPASS selected zones while leaving the rest of the system armed.
•CHIME mode alerts you to the opening of protected doors and windows while the system is disarmed.
Fire Protection
•Fire protection is always active (if installed) and an alarm sounds if a fire condition is detected
•If necessary, you can manually initiate a fire alarm using the touchpad.
•Refer to the Fire Alarm System section for information regarding fire protection, smoke detectors and planning emergency exit routes.
Security Codes
•You were assigned a
•Use your security code when arming and disarming the system, and when performing other system functions.
•Other users can be assigned different security codes.
•User codes can be assigned different authority levels, which define which system functions a particular user can perform.
– 5 –