
Oakleaf Woodburning Stove
Oakleaf to Flue Fireplace Conversion (Minimum NFPA 211 Liner Connection)
Flue Liner with Required
Air Space
Stainless Steel Chimney Connector Must Extend to Flue Liner
Minimum 8" Masonry
Thickness in Front of
Smoke Chamber
Use Damper Adapter or Seal with Non- Combustible Material
Damper Plate is Removed or Fastened in Open Position
Listed Fireplace
Trim Protection for
Reduced Clearance
Floor Protection*
Combustible Floor
Airtight insulated
*Floor Protection in Accordance with Solid Fuel Appliance Listing
NOTICE: When using rear flue configuration, a new upper rear heat shield,
The Chimney Connector Shall Not Pass Through an Attic or Roof Space, Closet or Similar Concealed Space, a Floor or Ceiling.
18 Dry Seasoned Wood Only! | Save These Instructions |