Harman Stove Company 828i manual Appendix a Fuel Conversion, Conversion KIT Components

Page 15

15

Appendix A: Fuel Conversion

CONVERTING THE CLARITY FIREPLACE INSERT FROM ONE GAS TO ANOTHER IN THE FIELD

NOTE: THE CONVERSION SHALL BE CAR- RIED OUT IN ACCORDANCE WITH THE RE- QUIREMENTS OF THE PROVINCIAL OR LO- CAL AUTHORITIES HAVING JURISDICTION AND IN ACCORDANCE WITH REQUIRE- MENTS OF THE CURRENT EDITION OF THE NATIONAL FUEL GAS CODE, ANSI Z223.1 or the CAN/CGA-B149 INSTALLATION CODES.

6.Install the replacement module, re-install the logs, re-connect the wiring connections and gas line fit- ting, secure the glass door, and replace the trim pan- els.

After completing the fuel conversion, an installer fuel label—supplied with the burner system mod- ule—must be filled out by the installer and attached

to the stove.

CONVERSION KIT COMPONENTS

•Burner system module

•Conversion label

NATURAL

PROPANE

The Clarity Fireplace Insert is designed to burn either natural gas or propane, but requires a dedi- cated burner system module for either fuel. Conver- sion to the alternate fuel is a simple matter of replac- ing one burner system module with another. A label on the burner system module will specify for which fuel it is intended.

To accomplish the conversion procedure, follow these steps.

1.Remove the trim panels and the glass door ac- cording to the directions on page 12.

2.Disconnect the electrical connections and the gas line fitting from the module.

3.Remove the cross log, the front logs, and the two ember strips following the directions on page 7.

4.Pull the module out an inch or so so that there is enough room to remove the rear log.

5.Remove the Burner System Module

The module can be removed as an integrated unit by simply pulling the module forward.

HARMAN CLARITY GAS

FIREPLACE INSERT

44

The above label on the Clarity's burnersystem module indicates that the unit is equipped to burn natural gas. A similar label is used for Propane.

CAUTION: LABEL ALL WIRES PRIOR TO DISCONNEC- TION WHEN SERVICING CONTROLS. WIRING ER- RORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION. VERIFY PROPER OPERATION AFTER SERVICING.

SEE WIRING DIAGRAM ON PAGE 18

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Harman Clarity 828i Gas Fireplace Insert Page Table of Contents Introduction .2 Gas Appliance Installation CodeClearances InstallationConnecting the Clarity Fireplace VentingTest for Flue Spillage Removing the Glass door AssemblyInsert to a GAS Supply Natural PropaneConnecting the Cordset Connecting Optional ThermostatInstalling the Insert Into the Fireplace AIR Shutter AdjustmentMonitoring the GAS Flame HOW to Light the FireInspecting the Venting MaintenanceRemoving the Glass Door Trim Panels Replacing the GasketCleaning the Glass Cleaning the LOG SET and FireboxConvection Blower Service Access Page Conversion KIT Components Appendix a Fuel ConversionAppendix B De-rating for High Altitude Appendix C Changing Orifices Appendix D Low Voltage Wiring Diagram Volt Wiring Diagram Parts List Burner Assembly Page Specifications Natural GAS PropaneMinimum Clearances from Combustible Construction Year Limited Warranty Commercial

828i specifications

Harman Stove Company has long been a respected name in the realm of heating solutions, and their 828i model is no exception. This innovative pellet stove embodies the perfect blend of technology, efficiency, and aesthetic appeal.

The Harman 828i features a sleek design, making it suitable for various home decors while providing optimal heating performance. With a heat output of up to 68,000 BTUs, it can effectively warm spaces ranging from 1,500 to 3,000 square feet, making it ideal for both residential and commercial applications. One of the most appreciated features of the 828i is its large hopper capacity, capable of holding up to 50 pounds of pellets. This translates to extended burn times and less frequent refueling, which is convenient for users.

One standout technology in the 828i is the Smart Control panel, which facilitates easy operation and allows users to program their heating preferences. With this advanced control system, users can set different heating schedules, maximizing comfort and efficiency while minimizing fuel consumption. Additionally, the stove is equipped with an intelligent temperature sensor that helps maintain a consistent temperature, further enhancing its efficiency.

The 828i also boasts a unique heat exchanger design that promotes superior heat transfer while minimizing emissions. Harman has incorporated their signature Emission-Reduction Technology, which ensures that the stove operates with a low environmental impact. This commitment to sustainability is evident in the high-efficiency ratings the stove achieves, often exceeding 80%.

For those who prioritize easy maintenance, the 828i is designed with user-friendly access for cleaning and service. The removable ash pan makes ash disposal straightforward, while the self-maintaining features of the stove reduce the need for frequent cleaning.

Overall, the Harman Stove Company 828i stands out in the crowded pellet stove market with its efficient heating capabilities, advanced technology, and thoughtful design. Whether for a cozy home or a larger commercial space, the 828i promises reliable warmth and impressive performance, making it a worthy investment for any heating needs. Its combination of modern aesthetics and cutting-edge function means it fits seamlessly into any environment while delivering the quality and reliability that Harman is known for.
Top Page Image Contents