Harman Stove Company 828i manual Appendix C Changing Orifices

Page 17

17

Appendix C: Changing Orifices

To change the orifices, such as when derating for altitude, follow these steps.

1.Remove the side trim panels according to the directions on page 12 to gain access to the levers that secure the glass door, then remove the glass door according to the directions on page 7.

2.Disconnect the electrical connections and the gas line fitting from the fuel module.

3.Remove the cross log, the front logs, and the two ember strips following the directions on page 7.

4.Pull the module out an inch or so so that there is enough room to remove the rear log.

5.Remove the burner system module.

6.Pull the top tray forward so that it disengages; lift the front edge up, then remove it.

8.Remove the center burner.

9.Remove the front burner.

10.Remove the 1/4-20 fasteners and retainer clip that secure the rear burner, then remove the rear burner.

11.Lift the rear air deflector straight up, and rock it forward.

12.Remove the orifice compartment cover; (before it can be removed, it may be necessary to use pliers to straighten the tab that goes throught the T-slot, which holds the cover in place. Pull the cover to the left and lift it out. The orifices will now be visible).

13.Lift the orifice compartment dividers straight up to remove them for better access. When you re- install the dividers, make sure they are seated all the way in to prevent air leakage from one com- partment to another.

14.Re-install all components in the reverse order that they were removed.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Harman Clarity 828i Gas Fireplace Insert Page Table of Contents Introduction .2 Gas Appliance Installation CodeClearances InstallationTest for Flue Spillage Connecting the Clarity FireplaceVenting Removing the Glass door AssemblyInsert to a GAS Supply Natural PropaneInstalling the Insert Connecting the CordsetConnecting Optional Thermostat Into the Fireplace AIR Shutter AdjustmentMonitoring the GAS Flame HOW to Light the FireRemoving the Glass Door Trim Panels MaintenanceReplacing the Gasket Inspecting the VentingConvection Blower Service Access Cleaning the GlassCleaning the LOG SET and Firebox Page Conversion KIT Components Appendix a Fuel ConversionAppendix B De-rating for High Altitude Appendix C Changing Orifices Appendix D Low Voltage Wiring Diagram Volt Wiring Diagram Parts List Burner Assembly Page Minimum Clearances from Combustible Construction SpecificationsNatural GAS Propane Year Limited Warranty Commercial

828i specifications

Harman Stove Company has long been a respected name in the realm of heating solutions, and their 828i model is no exception. This innovative pellet stove embodies the perfect blend of technology, efficiency, and aesthetic appeal.

The Harman 828i features a sleek design, making it suitable for various home decors while providing optimal heating performance. With a heat output of up to 68,000 BTUs, it can effectively warm spaces ranging from 1,500 to 3,000 square feet, making it ideal for both residential and commercial applications. One of the most appreciated features of the 828i is its large hopper capacity, capable of holding up to 50 pounds of pellets. This translates to extended burn times and less frequent refueling, which is convenient for users.

One standout technology in the 828i is the Smart Control panel, which facilitates easy operation and allows users to program their heating preferences. With this advanced control system, users can set different heating schedules, maximizing comfort and efficiency while minimizing fuel consumption. Additionally, the stove is equipped with an intelligent temperature sensor that helps maintain a consistent temperature, further enhancing its efficiency.

The 828i also boasts a unique heat exchanger design that promotes superior heat transfer while minimizing emissions. Harman has incorporated their signature Emission-Reduction Technology, which ensures that the stove operates with a low environmental impact. This commitment to sustainability is evident in the high-efficiency ratings the stove achieves, often exceeding 80%.

For those who prioritize easy maintenance, the 828i is designed with user-friendly access for cleaning and service. The removable ash pan makes ash disposal straightforward, while the self-maintaining features of the stove reduce the need for frequent cleaning.

Overall, the Harman Stove Company 828i stands out in the crowded pellet stove market with its efficient heating capabilities, advanced technology, and thoughtful design. Whether for a cozy home or a larger commercial space, the 828i promises reliable warmth and impressive performance, making it a worthy investment for any heating needs. Its combination of modern aesthetics and cutting-edge function means it fits seamlessly into any environment while delivering the quality and reliability that Harman is known for.
Top Page Image Contents