Harman Stove Company Epla Appliance Repair and Resources for Indoor Fireplaces
Page 4

4

Introduction

The Harman Clarity 828I Vented Gas Fireplace Insert is a listed gas-fired vented room heater tested by Intertek Testing Services/Warnock Hersey to ANSI standard Z21.88-2002, CSA2.33- M02, and CAN/CGA-2.17-M91.

The installation of the Clarity Fireplace Insert must conform with local codes, or in the absence

oflocal codes, with National Fuel Gas Code, ANSI Z223.1 — latest edition (NFPA 54) and CAN 1 B1-

149.1 and .2 Gas Appliance Installation Code.

Installer l'appareil selon les codes ou règlements locaux, ou, en l'absence de tels règlements, selon les Codes d'installation CAN/CGA-B149.

The Clarity Fireplace Insert is not for use in mobile homes.

CAUTION: This appliance must be vented to the outside.

INSTALLATION ANDREPAIR OF THE CLAR- ITY FIREPLACE INSERT SHOULD BE DONE BY A QUALIFIED SERVICE PERSON. THE APPLI- ANCE SHOULD BE INSPECTED BEFORE USE AND AT LEAST ANNUALLY BY A QUALIFIED SERVICE PERSON. MORE FREQUENT CLEAN- ING MAY BE REQUIRED DUE TO EXCESSIVE LINT FROM CARPETING, BEDDING MATE- RIAL, ETC. IT IS IMPERATIVE THAT CONTROL COMPARTMENTS, BURNERS, AND CIRCU- LATING AIR PASSAGEWAYS OF THE APPLI- ANCE BE KEPT CLEAN. ANY SAFETY SCREEN OR GUARD REMOVED FOR SERVICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERATING THE APPLIANCE.

S'ASSURER QUE LE BRÛLEUR ET LE COMPARTIMENT DES COMMANDES SONT PROPRES. VOIR LES I NSTRUCTI ONS D'INSTALLATION ET D'UTILISATION QUI ACCOMPAGNENT L'APPAREIL.

When operating your Harman Clarity Fireplace Insert, respect basic safety standards.

Read these instructions carefully before you at- tempt to operate the heater. Failure to do so may result in damage to property or personal injury and may void the product warranty.

Consult with your local building code agency and insurance representative before you begin your installation to ensure compliance with local codes, including the need for permits and follow- up inspections.

Observing required clearances to combustible materials, proper connection to an approved vent- ing system, and the accessibility of the gas and electrical supply must all be considered when planning the installation of an Clarity Fireplace Insert.

Adequate clearances around air openings to the combustion chamber and provisions for adequate combustion and ventilation air must be provided.

Install the Clarity Fireplace Insert only in a listed solid-fuel burning factory-built fireplace or a ma- sonry solid-fuel burning fireplace. The Fireplace Insert and vent should be enclosed when installed in, or when passing through, a living area where children may come in contact with it.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Harman Clarity 828i Gas Fireplace Insert Page Table of Contents .2 Gas Appliance Installation Code IntroductionInstallation ClearancesVenting Connecting the Clarity FireplaceTest for Flue Spillage Assembly Removing the Glass doorNatural Propane Insert to a GAS SupplyConnecting Optional Thermostat Connecting the CordsetInstalling the Insert AIR Shutter Adjustment Into the FireplaceHOW to Light the Fire Monitoring the GAS FlameMaintenance Removing the Glass Door Trim PanelsReplacing the Gasket Inspecting the VentingCleaning the LOG SET and Firebox Cleaning the GlassConvection Blower Service Access Page Appendix a Fuel Conversion Conversion KIT ComponentsAppendix B De-rating for High Altitude Appendix C Changing Orifices Appendix D Low Voltage Wiring Diagram Volt Wiring Diagram Parts List Burner Assembly Page Natural GAS Propane SpecificationsMinimum Clearances from Combustible Construction Year Limited Warranty Commercial

828i specifications

Harman Stove Company has long been a respected name in the realm of heating solutions, and their 828i model is no exception. This innovative pellet stove embodies the perfect blend of technology, efficiency, and aesthetic appeal.

The Harman 828i features a sleek design, making it suitable for various home decors while providing optimal heating performance. With a heat output of up to 68,000 BTUs, it can effectively warm spaces ranging from 1,500 to 3,000 square feet, making it ideal for both residential and commercial applications. One of the most appreciated features of the 828i is its large hopper capacity, capable of holding up to 50 pounds of pellets. This translates to extended burn times and less frequent refueling, which is convenient for users.

One standout technology in the 828i is the Smart Control panel, which facilitates easy operation and allows users to program their heating preferences. With this advanced control system, users can set different heating schedules, maximizing comfort and efficiency while minimizing fuel consumption. Additionally, the stove is equipped with an intelligent temperature sensor that helps maintain a consistent temperature, further enhancing its efficiency.

The 828i also boasts a unique heat exchanger design that promotes superior heat transfer while minimizing emissions. Harman has incorporated their signature Emission-Reduction Technology, which ensures that the stove operates with a low environmental impact. This commitment to sustainability is evident in the high-efficiency ratings the stove achieves, often exceeding 80%.

For those who prioritize easy maintenance, the 828i is designed with user-friendly access for cleaning and service. The removable ash pan makes ash disposal straightforward, while the self-maintaining features of the stove reduce the need for frequent cleaning.

Overall, the Harman Stove Company 828i stands out in the crowded pellet stove market with its efficient heating capabilities, advanced technology, and thoughtful design. Whether for a cozy home or a larger commercial space, the 828i promises reliable warmth and impressive performance, making it a worthy investment for any heating needs. Its combination of modern aesthetics and cutting-edge function means it fits seamlessly into any environment while delivering the quality and reliability that Harman is known for.
Top Page Image Contents