Step 8
Installing Trim
Surrounds
Combustible materials MUST NEVER overlap onto the front face.
WARNING - WHEN FINISHING THE FIREPLACE INSERT, NEVER OBSTRUCT OR MODIFY THE AIR INLET/OUTLET GRILLES ON THE INSERT IN
ANY MANNER.
FIREBOX |
SURROUND |
WITH TRIM |
SURROUND |
TRIM |
DOOR |
ON/OFF |
SWITCH |
LOW |
VOLTAGE |
WIRES |
Figure 12
NOTE: REMOVE FRONT TRIM DOOR AND GLASS
DOOR ASSEMBLIES FROM THE INSERT BEFORE
SURROUND INSTALLATION.
1.Find the coiled low voltage wires and ON/OFF switch attached to outer right side of the insert. See Figure 12.
2.Disconnect the ON/OFF switch from the low voltage wire leads, and insert the short wires of the ON/OFF switch through the hole at the upper right corner of the surround and push the back of the switch through the hole - it will be retained in the hole.
16