7Heater Setup
A. Remove Shipping Materials
Cut and discard ties securing the logs to the grate and bun- dling the fi rescreen. Remove screws holding ember bed shipping tabs in place (located in front of ember bed), re- move tabs and discard. Replace screws.
B. Clean Heater
The heater was cleaned at the factory but dust may have accumulated during shipping.
•Vacuum fi rebox area and wipe acrylic panel (in back of fi rebox) with a dry,
•Remove all fi ngerprints and smudges from the front trim and glass doors to avoid permanently burning them into the fi nish.
C. Accessories
Refer to the instructions included with the accessory.
14 | Heat & Glo • CRESTFIRE Series Electric Fireplace • |