Desa LGCFTP Connecting Equipment shutoff valve to heater control, Checking GAS Connections

Page 16

INSTALLation

Continued

CONNECTING Equipment shutoff valve to heater control

Installation Items Needed

• Phillips screwdriver

• sealant (resistant to propane/LP gas, not provided)

1.Remove fireplace screen. Remove two screws that hold fireplace screen in place for shipping. These screws are located near top of screen. Discard screws. Lift fireplace screen up and pull out to remove.

2.Remove screws that attach branch support to fireplace (see Figure 22). Carefully lift up branch support and remove from fireplace (see Figure 22).

3.Route flexible gas line, included, from fireplace control to equipment shutoff valve through side or rear access holes in outer casing.

NOTICE: Most building codes do not permit concealed gas connections. A flexible gas line is provided to allow accessibility from the fireplace (see Figure 23). The flexible gas supply line con- nection to the equipment shutoff valve should be accessible.

CAUTION: Avoid damage to regulator. Hold gas regulator with wrench when connecting it to gas piping and/or fittings.

4.Apply pipe joint sealant lightly to male threads of gas connector attached to flexible gas line/ equipment shutoff valve (see Figure 23).

5.Check all gas connections for leaks. See

Checking Gas Connections.

6.Replace branch support back into fireplace. Feed flexible gas line into fireplace base area while replacing branch support. Make sure the entire flexible gas line is in fireplace base area. Reattach branch support to fireplace with screws removed in step 2.

Branch

Screen

Shoulder

Support

Shipping

 

Screw

Screw

Flexible

Gas Line

Screen

Figure 22 - Removing Log Base

Assembly From Fireplace

To Fireplace

Equipment Shutoff

Gas Regulator

Valve Provided by

 

Installer

PROPANE/LP

To External

Regulator

Flexible Gas Line from Fireplace Gas Regulator

Provided with Fireplace

NATURAL

To Gas Supply

Figure 23 - Attaching Flexible Gas Line

to Equipment Shutoff Valve

CHECKING GAS CONNECTIONS

WARNING: Test all gas piping and connections, internal and external to unit, for leaks after installing or servicing. Correct all leaks at once.

WARNING: Never use an open flame to check for a leak. Apply a noncorrosive leak detec- tion fluid to all joints. Bubbles forming show a leak. Correct all leaks at once.

16

www.desatech.com

119508-01A

Image 16
Contents Lgcftp and Lgcftn Shown with Optional Cabinet Mantel/Hearth Base Accessory14,000 to 26,000 Btu/Hr with Thermostat Table of Contents Safety InformationSafety Information Product Information Local CodesProvide adequate clearances around air openings Assembly Product FeaturesUnpacking Assembly Assembling and Installing TrimAir For Combustion Ventilation Providing Adequate VentilationConfined and Unconfined Space Determining FRESH-AIR Flow for fireplace LocationDetermining if You Have a Confined or Unconfined Space Installation Ventilation AIRVentilation Air From Inside Building Ventilation Air From OutdoorsCheck GAS Type Installation ItemsLocating Fireplace Built-In Fireplace Installation Fireplace pilot and burner must be at least 18 above floorCheck all gas connections for leaks. See If you have not assembled firebox, follow instructions onChecking Gas Connections, Mantel Clearances for Built- In Installation Optional Mantel InstallationInstalling blower accessory GA3450TA Removing Upper Louver AssemblyInstalling Blower Assembly Can cause improper and dangerConnecting to GAS Supply For Built-In InstallationReinstall valve cover shield Extension CordAccessories, Natura LConnecting Equipment shutoff valve to heater control Installation Items NeededChecking GAS Connections Checking Gas ConnectionsCorrect all leaks at once Pressure Testing Fireplace Gas ConnectionsTest Pressures Equal To or Less Than Psig 3.5 kPa Operating Fireplace For Your Safety Read Before LightingLighting Instructions Manual Lighting Procedure Operating FireplaceTo Turn OFF GAS To Appliance Thermostat Control OperationCleaning Maintenance Inspecting BurnerPilot Flame Pattern Burner Flame PatternAir Passageways CabinetExterior Troubleshooting Observed Problem Possible Cause RemedyTroubleshooting MaintenanceSee Cleaning and Mainte Maintenance,Gas leak. See Warning See Checking Gas ConnecSpecifications Service HintsTechnical Service Replacement PartsAccessories Equipment Shutoff Valve GA5010Brass Trim KIT GA6095 THERMOSTATICALLY-CONTROLLED Blower KIT GA3450TAIllustrated Parts Breakdown Models Lgcftp and LgcftnParts List Parts Centrals 119508-01A Warranty Information Keep this WarrantyLimited Warranty VENT-FREE Compact fireplace

LGCFTN, LGCFTP specifications

Desa LGCFTP and LGCFTN are innovative technology solutions designed to cater to modern communication and data management needs. These platforms are part of a broader suite of services aimed at enhancing connectivity, streamlining data flow, and enabling seamless interaction between users and systems.

One of the main features of Desa LGCFTP is its robust file transfer capabilities. It utilizes the File Transfer Protocol (FTP) to ensure that data can be moved securely and efficiently over networks. This feature is particularly crucial for businesses that handle large amounts of data, as it allows for the quick transfer of files ranging from reports to multimedia content without compromising on security.

In addition to the FTP functionalities, Desa LGCFTN incorporates advanced networking technologies that enhance connectivity among users. This platform is designed to facilitate reliable connectivity options, enabling organizations to establish networks that can support various applications, from simple database queries to complex real-time data exchanges.

Both Desa LGCFTP and LGCFTN are built with scalability in mind. This means that as user requirements grow, these systems can easily adapt to accommodate increased data loads and more extensive user bases. The technology underpinning these platforms is based on an architecture that supports distributed processing, which is essential for ensuring that performance remains high, even as demand fluctuates.

Security is a top priority for both platforms. They implement a range of protocols and encryption techniques to safeguard data during transfers and while at rest. This commitment to security helps organizations maintain compliance with industry standards and regulations, which is increasingly important in today’s data-driven environment.

Desa LGCFTP and LGCFTN also emphasize user experience. Their intuitive interfaces make it easy for users to manage files and navigate through different features. This focus on usability reduces the learning curve, ensuring that teams can quickly leverage the full capabilities of the platforms without extensive training.

In summary, Desa LGCFTP and LGCFTN represent cutting-edge solutions in the realm of file transfer and network connectivity. With their emphasis on security, scalability, and user experience, these platforms are well-equipped to meet the challenges faced by modern businesses, making them invaluable tools for efficient data management and communication.