Vermont Castings, Majestic Products, DEF33/36, DEFD33/36
Bay Window Installation
CAUTION: Remove all plastic from brass trims.
Do not remove existing frame window assembly.
1.Remove existing bottom louvre and hinges from fireplace, if the fireplace has been installed with louvres. (Set aside the four [4] screws).
2.Remove existing top louvre from fireplace by lifting up and pulling out, if the fireplace has been installed with louvres. If the fireplace was installed with the Radiant face, move to step 3.
3.Hang Bay Window unit over existing glass frame.
4.Reinstall upper louvre assembly.
5.Bottom brass trim is removable when fireplace is installed with marble or tile surround which covers the fireplace bottom.
Louvre Removal
To remove top louvre, pull the louvre up and then lift it out (Fig. 9).
2.
Louvre
1.
Glass Panel
FP444
Fig. 9 Remove louvre assembly.
Louvre Face Installation
1.Remove the top radiant face by removing the two screws securing it in position; one screw is located on each side of the top radiant face at the bottom front.
2.Remove the deflector cabinet top from the top radiant face. (Save the screws and deflector cabinet top to reinstall into the top Radiant panel.)
3.Open the access Radiant face door, then remove the bottom radiant face by removing three (3) screws securing it in position. One screw is located on each side of, and at the center of, the bottom radiant face at the top front.
4.Reinstall the deflector cabinet top fasteners in the
5.Install bracket louvre top fasteners into the prepunched screw holes in the cabinet bottom.
6.Install hinge fasteners in the prepunched screw holes at the front of the fireplace cabinet base.
7.Install the bottom louvre by aligning the prepunched hinge holes with the
8.Install the top louvre by pushing it down into the slot of the bracket louvre; refer to step 5.
14 | 10005898 |