SETTING THE
CURRENT TIME
1.Press POWER to turn on the System 730, then press DIS- PLAY once. TIME and the last- set time appear on the display.
•If TIME disappears before you finish setting the hour and minute, start again from Step 1.
•When power is disconnected or interrupted, then restored, the last known time flashes on the display. If this happens, reset the time.
2.Within 5 seconds, press HOUR to change the hour setting or MINUTE to change the minute setting.
Notes:
•When changing the hour, be sure to set it the correct AM or PM hour.
•To rapidly advance the hour or minute setting, press and hold
HOUR or MINUTE.
INSTALLING BATTERIES IN THE REMOTE CONTROL
The remote control requires two AAA batteries (not supplied) for power. For the best performance and long- est life, we recommend alkaline bat- teries, such as Radio Shack Cat. No.
Caution: Always use fresh batteries of the required size and type.
1.To open the battery compart- ment cover, slide it in the direc- tion of the arrow.
9
