5.Press PLAY , or CD on the remote control, to play the pro- grammed sequence. ,
Note: To briefly | stop pro- | |||||||
grammed play, press PAUSE |
|
|
|
| ||||
|
| |||||||
on the main system. |
|
|
| appears | ||||
|
| |||||||
|
|
on the display. To resume pro-
grammed play, press PLAY | , | |||||
or CD | on the remote control. | |||||
|
|
|
| disappears. |
| |
|
|
|
| |||
|
|
|
|
6.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD changer at any time during pro- grammed play, press and
release STOP , or press CD
on the remote control. and the CD’s elapsed play time disappear from the display.
22
Notes:
•Press PLAY , or CD on the remote control, to play the pro- grammed sequence again.
•To replace a programmed track, press RECALL on the remote control until the memory number of the track you want to replace appears on the display. Then repeat Steps
•To resume regular or random play after storing a programmed sequence, you must first erase the programmed sequence (see “Erasing a Programmed Se- quence”).
Reviewing a Programmed Sequence
To review a programmed sequence, while play is stopped, repeatedly press RECALL on the remote control. As you press it, the CD, track num- ber, and memory position of each stored track appears.