USING AN ADDITIONAL AUDIO SOURCE
If you connected an additional audio source, such as a TV, VCR, turnta- ble, or an external CD changer or cassette deck, you can use your Sys- tem 730 to listen to or record from that source.
LISTENING TO AN ADDITIONAL AUDIO SOURCE
1.Set VOLUME (or press VOLUME
– on the remote control), to its lowest setting, and be sure that the audio source’s volume con- trol (if any) is also set to its low- est level.
2.Press VIDEO AUX, or VIDEO on the remote control. VIDEO appears on the display.
3.Operate the audio source according to its owner’s manual.
4.Set VOLUME (or press VOLUME + or – on the remote control) and the audio source’s volume con- trol (if any) to the desired listen- ing level.
RECORDING FROM AN ADDITIONAL AUDIO SOURCE
To record onto a cassette tape from an additional audio source, follow the steps in “Recording from the Radio,” with the following changes:
•In Step 1, press VIDEO AUX, or VIDEO on the remote control, so VIDEO appears on the display.
•Begin play on the additional audio source as instructed in its owner’s manual after you release PAUSE to begin record- ing.
35