When the tape in TAPE 1 reaches the end, the tape in TAPE 2 automatically begins to play.
Note: To briefly stop the tape in either deck during playback, press PAUSE on the desired deck. The button locks and the tape stops. Press PAUSE again to continue playback.
4.At the end of the tape in TAPE 2, the system automatically stops the tape. To stop playback on either deck at any time, press
STOP/EJECT on that deck. PLAY releases.
Notes:
•If you press STOP/EJECT on TAPE 1 during consecutive play, the tape in TAPE 2 automatically begins to play.
•To rapidly
The System 730 automatically stops the tape when it reaches the end. To stop the tape at any time during
RECORDING ONTO A CASSETTE TAPE
The System 730 lets you record onto a cassette tape from the CD changer, radio, another cassette tape, or from an external microphone (not sup- plied).
Note: You can also record from an additional audio source (see “Re- cording from an Additional Audio Source”).
Caution: Never try to force down RECORD after you remove an erase- protection tab from a cassette tape (see “Preventing Accidental Era- sure”). You might damage the tape mechanism.
Recording from a CD
Follow these steps to record from a CD onto a cassette tape.
1.Press CD. CD, the last selected CD number, and TRACK 1 appear on the display.
2.Load the CD(s) you want to record into the CD changer.
27