BASIC OPERATION
USING THE DEMONSTRATION FEATURE
To showcase the features of your System 730 and its dual display, press DEMO, or press and hold DIS- PLAY for about 2 seconds. The sys- tem repeatedly runs a preset program on both displays.
Note: The buttons on the remote control and the system’s front panel operate several of the same func- tions, although they might be labeled differently. You can use either of these controls to operate the System 730.
Caution: Exposing the remote con- trol or SENSOR to direct sunlight or strong lights, such as a spotlight, will reduce the remote control’s operat- ing distance and can make it inoper- ative.
Press DEMO or DISPLAY to stop the demonstration.
USING THE REMOTE CONTROL
The remote control communicates with your system through the remote sensor located on the front of the system. To use the remote control, be sure that the front end of it is pointing with a clear path toward SENSOR, then press the desired but- ton(s).
TURNING ON/OFF THE SYSTEM
Press POWER to turn on the System
730.
To turn off the system, press POWER again.
11