Optimus SYSTEM 730 owner manual Programmed Play, Storing/Playing a Programmed Sequence

13-1277.fm Page 21 Wednesday, July 14, 1999 4:11 PM

PROGRAMMED PLAY

You can program the CD changer to play up to 50 tracks in any order you choose, and you can program the same CD and/or track to play more than once.

Storing/Playing a Programmed Sequence

1.With at least one CD in the CD changer and no CD playing, select a CD by pressing the cor- responding disc number (1-7), or press DISC then the desired number on the remote control. CD, the selected CD number, and TRACK 1 appear on the display.

2.Track 1 of the current CD is automatically selected. To select a different track, press << or

>>on the main system, or CD

<<or >> or the desired track number on the remote control. As you press it, the track num- ber changes on the display.

3.To store the selected track, press MEMORY on the remote control. MEMORY flashes for about 4 seconds, then lights steadily, and P-01(the program position number) appears for about 10 seconds.

Note: If you pressed the desired track number on the remote con- trol, the track number flashes on the display and you must press MEMORY within 4 seconds. If the track number stops flashing before you press MEMORY, repeat Step 2 then try again.

4.Repeat Steps 1-4 to store up to 50 tracks.

Note: If you try to store more than 50 tracks, FULL appears on the display.

21