3.Load a blank cassette tape, or one you want to record over, into TAPE 2.
4.To record the tracks from all loaded CDs in order, press the disc number of the first CD you want to begin recording, or press DISC then the number on the remote control.
To record only selected tracks or change the sequence of the tracks, you must first program the desired sequence.
5.To automatically start the CD and begin recording at the same time (synchronously), press RECORD on TAPE 2. PLAY auto- matically locks down with
RECORD, and 
appears. Then the first selected CD or programmed track begins to play, its elapsed play time appears, and the tape begins recording.
Note: To briefly stop the tape while recording, press PAUSE on TAPE 2. The button locks and the tape stops. Press PAUSE again to resume recording.
28
To briefly stop the CD while
recording, press PAUSE 
on
the main system. 
appears on the display. To resume play, press PLAY 
, or press CD 
on the remote control. 
dis- appears.
6.To listen to the CD during recording, adjust VOLUME (or press VOLUME + or – on the remote control) to the desired listening level, and select the desired
7.The System 730 automatically stops the tape when it reaches the end. To stop the tape at any time during recording, press
STOP/EJECT on TAPE 2.
To stop the CD during or after recording, press STOP 
on the CD changer, or press CD 
on the remote control.
Note: The System 730 automati- cally stops the CD changer when it reaches the end of all loaded CDs or the programmed sequence. If the tape is still recording, press STOP/EJECT on TAPE 2 to stop the tape.
