Copying Cassette Tapes
The System 730 lets you dub (copy) one cassette tape to another, one side at a time, using its dual cassette decks (TAPE 1 and TAPE 2).
1.Load a blank cassette tape, or one you want to record over, into TAPE 2.
2.Load the tape you want to record from into TAPE 1.
3.Press PAUSE, then RECORD on TAPE 2. PLAY automatically locks down with RECORD and
PAUSE.
4.To record at one and a half times the normal speed, press HI- SPEED.
5.Press PLAY on TAPE 1. The tape in TAPE 1 begins to play, PAUSE automatically releases on TAPE 2, and TAPE 2 begins to record.
6.To listen to the tape in TAPE 1 during recording, adjust VOL- UME (or press VOLUME + or – on the remote control) to the desired listening level, and select the desired
Note: If you use
7.To briefly stop the tape in either deck while recording, press PAUSE on that deck. The button locks and the tape stops. Press PAUSE again to resume record- ing.
8.The System 730 automatically stops the tape in each deck when the tape reaches the end of the side.
To stop the tape in either deck at any time during recording, press STOP/EJECT on that deck.
29
