Optimus SYSTEM 730 owner manual Using Memory Tuning, Storing a Station in Memory

13-1277.fm Page 15 Wednesday, July 14, 1999 4:11 PM

•To improve reception for weak FM stereo stations, press

STEREO/MODE so MONO

(monaural) appears on the display. The sound is no longer in stereo, but reception should improve. To return to stereo sound, press STEREO/ MODE.

•For the best FM reception, fully extend the FM antenna.

•The AM antenna is built-in. To improve AM reception, move or re-position the System 730.

3.Set VOLUME (or press VOLUME + or – on the remote control) to the desired level, and select the desired X-BASS and graphic equalizer settings.

3. Press MEMORY. MEMORY appears on the display.

4.Within 3 seconds, press a num- ber (1-8) for the memory loca- tion where you want to store the station. MEMORY disappears, and P (program), the selected memory number, and STATION

appear on the display. For example, if you select memory number 8, P8 STATION appears.

USING MEMORY

TUNING

You can store and easily recall up to 24 of your favorite AM and FM radio stations (8 AM and 16 FM) in the System 730’s memory.

Storing a Station in Memory

1.Press TUNER to select AM, FM1, or FM2.

2.Press TUNING UP or DOWN, or

TUNING s or t on the remote con- trol, to tune to the desired sta- tion.

Note: If MEMORY disappears before you press the desired memory number, repeat Steps 3 and 4 then try again.

5.Repeat Steps 2-4 to store up to eight stations each in AM, FM1, and FM2.

Notes:

•You cannot clear a station from memory, but you can store a new one in its place.

15