Installation
Where to locate the equipment
When deciding where to locate the equipment, consider your cooling needs, air flow, the location of the electrical outlet (no more than 2.4 m (8 ft) from the equipment), and access for the condenser intake and exhaust.
Cooling needs. Position the equipment as close as possible to the main source of heat that requires cooling.
Air flow. Position the equipment so that its rear is at least 200 mm (8 in) away from a wall or other equipment.
Location of electrical outlet. Place the equipment no farther than 2.4 m (8 ft) from a dedicated 115V, 60Hz, 20A branch circuit receptacle.
na0143a
Dimensions are shown in mm (in).
Electrical Hazard: Do not use extension cords with this equipment. Using an extention cord reduces circuit protection and voids the warranty.
Caution: To help avoid loss of cooling, only connect this equipment to a
Lock the rolling casters
To prevent the equipment from rolling, press down on the locking tabs on the two front casters.
na0176a
NetworkAIR ACPA4000 | 7 |
