APC ACPA4000 manual Operating schedules, Schedule 1 of, Schedule On/Off, Mode, Set Point, Blower

Operating schedules

Path: Main Menu > Setup > Operating Schedule. Program up to eight sets of environmental controls that run according to the time and day.

Scheduling: on/off. Select Off to use the default schedule, or On to use the programmed schedules.

Reset schedules. Turn all schedules off and reset them to their factory default settings.

Edit schedules. Set the cooling options for up to eight time periods.

Schedule: 1 of 8	Select a schedule to modify.
Schedule: On/Off	Activate or deactivate this schedule.
Mode	Choose Cool, Vent Only, or System Off. See “Mode” on page 20.
Set Point	Set the target temperature for the room. See “Set Point” on
	page 20.
Blower	Set the speed of the blower to High or Low. Use the Low blower
	speed to remove humidity from the room air.
Day	Choose the days for this schedule to run. Options include: Every
	day, Weekdays, Weekends, Sun, Mon, Tue, Wed, Thu, Fri, and
	Sat.
Start Time	Set the time when this schedule becomes active. Times are entered
	using a 24-hour clock.
Stop Time	Set the time when this schedule becomes inactive. Times are
	entered using a 24-hour clock.

Note: If schedules overlap, the schedule with the highest day-priority runs. The priority is:

• Highest: Sun, Mon, Tue, Wed, Thu, Fri, Sat

•Next Highest: Weekdays, Weekends

•Lowest: Every Day

NetworkAIR ACPA4000 21