Assemble the ducts
1.Thread the duct collars counterclockwise onto each of the ducts until they bottom out.
Note: The hoses used are directional and reduce airflow if not properly installed. Expand the length of hose to fit the required space.
2.Install each hose so that the leading edge of the compressed section of the hose matches air direction flow.
3.Slide the duct collar of each hose
over the ceiling adapter sleeves and turn the duct collar to lock in place.
Note: Connect the air diverter side of the ceiling adapter to the exhaust hose.
4.Slide the duct collars on the other
end of the ducts over the condenser flanges and turn to lock in place.
na0312a
Air Flow
na1235a
na0317a |
na0150b | na0150b | na0150b |
10 | NetworkAIR ACPA4000 |
