APC ACPA4000 manual How to Use the Interface, Turn on the equipment, Scrolling status screens

How to Use the Interface

All settings are controlled through the display interface located on the front of the equipment.

Turn on the equipment

After you plug in the power cord, the equipment immediately begins operation based on its last programmed settings.

Note: The equipment waits three minutes before engaging the compressor if it has been unplugged or has been off for less than three minutes.

Scrolling status screens

After start-up, the interface displays a screen that shows the firmware revision number. The display interface then scrolls automatically and continuously through five screens of status information as shown.

System Status

Blower: High

System Status

Power: ON

Mode: Cool

Setpoint: 65 ° F

No Active Alarms
System Time:
Month-day year	Time

Temp & Humidity
Supply: 62 ° F
Return: 76 ° F
Remote: 75 ° F	13 %
Default schedule
is active		na1286a
System Time:
Month-day year	Time

Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen.

NetworkAIR ACPA4000 17