Framing and Finishing, Nailing ﬂanges

Chateau™

Framing and Finishing

NOTE: The valve box assembly must be installed in the same room as the ﬁreplace.

1.Choose the unit location.

2.The unit is shipped with four (4) nailing ﬂanges mounted to the sides near the front corners. (Fig. 5)

3.Frame the ﬁreplace with a header across the top of the standoff. (Fig. 6) It is very important to allow for the ﬁnished wall face along with marble, tiles or any

	Bend
	Line
	3"	3"
	3"	(76mm) Min.
	(76mm) Min.	(76mm) Min.
	(76mm) Min.
	1¹⁄₂"
	(38mm)
	Max. Hearth Height	FP1357
		FP1357

Fig. 5 Nailing ﬂanges.

3" (76mm)

3"	FP1358
(76mm)

Fig. 6 Fireplace framing.

other noncombustible face ﬁnish material desired when setting the depth of the framing.

4.Attach the ﬁreplace nailing ﬂanges to the frame as shown in Figure 5.

5.The gas components are located in the control panel assembly attached to the right side of the unit. Choose the desired location on the wall or mantel for the valve box assembly. The conduit length is 5ʼ (1524mm). (Fig. 7) The framing dimensions for the box are 12¹⁄₄”L x 9¹⁄₄”W x 5⁵⁄₈”D (311mm x 235mm x 143mm). When the framing for the box is complete, remove the screws securing the valve box to the outer casing. Carefully remove the valve box and, without stressing the conduit, slide the box into the framed opening. Replace the screws removed from the side of the outer casing.

45" (1143mm)

Fig. 7 Valve box assembly location.

6.To secure the valve box assembly to the framing members, open the box door, remove extension knob(s). For units with two piece cover plates, re- move the front cover plate by removing the screws holding the front plate to the second plate. Discon- nect the wires for the pilot indicator and remove the second plate located at the top of the box.

For units with a one piece cover plate, remove the valve cover by removing the two (2) screws securing the valve cover to the box, hold the cover plate with one hand and disconnect the wires to the switch and pilot indicator (R models only). NOTE: Do not allow the valve cover plate to hang from the pilot indicator wires as this could damage the wires.

Secure the box to the framing through the two (2) holes at the top and one (1) on each side using sheet rock screws. (Fig. 8) After framing the box, replace the wires, the valve cover, the extension knob(s) in reverse order.

NOTE: The pilot indicator body is labelled +/-, make sure the positive wire on the pilot indicator goes to ground and the negative goes to the plug between the valve and the thermocouple.

20006081

DVT38 specifications

The Vermont Casting DVT38 is a standout model in the realm of contemporary gas fireplaces, epitomizing both innovative engineering and aesthetic elegance. Designed with a focus on efficiency and style, the DVT38 offers homeowners an exceptional heating experience while enhancing the ambiance of their living spaces.

One of the main features of the Vermont Casting DVT38 is its impressive heat output. With a BTU range that ensures warmth for larger areas, the fireplace is capable of efficiently heating spaces without consuming excessive fuel. This is a critical aspect for homeowners seeking both comfort and energy savings. The fireplace integrates a dual burner system, promoting a uniform heat distribution and ensuring that every corner of the room enjoys consistent warmth.

Another notable characteristic of the DVT38 is its advanced burner technology. The unique burner design allows for a natural gas or propane option, giving consumers flexibility based on availability and preference. The adjustable flame settings enable users to customize the heat output and ambiance, perfect for both cozy winter evenings and social gatherings.

In terms of aesthetics, the Vermont Casting DVT38 boasts a sophisticated design that complements various interior styles. It features large glass viewing areas which present a captivating flame pattern, enhancing the visual appeal of the unit. The contemporary facade can be finished with a variety of trims and options, allowing homeowners to tailor the fireplace to their personal décor.

The DVT38 is also equipped with an easy-to-use electronic ignition system, further simplifying the operation. This feature ensures that lighting the fireplace is hassle-free, eliminating the need for matches or manual lighting. Additionally, many models come with a remote control option, allowing users to adjust settings from a distance, thereby enhancing convenience and usability.

Moreover, the DVT38 is built with durability in mind, incorporating high-quality materials that withstand the test of time while providing a reliable heating solution. Vermont Castings is renowned for its commitment to craftsmanship, and this model exemplifies that ethos.

In summary, the Vermont Casting DVT38 is an exquisite blend of functionality and design. With efficient heating capabilities, cutting-edge technology, and customizable aesthetics, it stands out as a premier choice for anyone looking to elevate their home heating experience. Whether for warmth or ambiance, the DVT38 is engineered to deliver satisfaction for years to come.