Vermont Casting DVRT41 manual Framing And Finishing, Gas Specifications, High Elevations

Page 7

Framing And Finishing

Check fireplace to make sure it is lev- elled and properly positioned.

To mount the appliance:

1.Choose the location.

2.This unit comes with four (4) flanges pre-mounted on both sides of the fireplace to allow two different drywall thicknesses to be used. Flange “A” is for 1/2” drywall while flange “B” is for 5/8” drywall.

3.Bend the desired flanges out 90° on both sides of the fireplace. Slide the fireplace into the framed opening until the flanges contact the front surfaces of the framing. Level the unit and secure it firmly in place.

Flange

Drywall

Flange Location for

Position

Depth

Desired Drywall Depth

A

1/2” / 13mm

 

B

5/8” / 16mm

 

A

B

 

 

 

FP1539

Fig. 5 Drywall flange location.

 

DVRT41Direct Vent Gas Fireplace

Gas Specifications

 

 

 

MAX.

MIN.

 

 

GAS

INPUT

INPUT

MODEL

FUEL

CONTROL

B.T.U.H

B.T.U.H.

DVRT41RN

Natural Gas

Millivolt Hi/Lo

36,000

25,200

DVRT41RP

Propane

Millivolt Hi/Lo

36,000

27,000

DVRT41RFN

Natural Gas

Comfort Control

36,000

25,200

DVRT41RFP

Propane

Comfort Control

36,000

27,000

DVRT41EN

Natural Gas

24 Volt Hi/Lo

36,000

25,200

DVRT41EP

Propane

24 Volt Hi/Lo

36,000

27,000

 

 

 

 

 

Gas Inlet and Manifold Pressures

 

Natural

LP (Propane)

Minimum Inlet Pressure

5.5” w.c.

11.0” w.c.

Maximum Inlet Pressure

14.0” w.c.

14.0” w.c.

Manifold Pressure

3.5” w.c.

10.0” w.c.

 

 

 

DVRT41

Certified To

ANSI Z21.88-2002/CSA 2.33-2002

Vented Gas Fireplace Heater

High Elevations

Input ratings are shown in BTU per hour and are certified without deration for elevations up to 4,500 feet (1,370m) above sea level.

For elevations above 4,500 feet (1,370m) in USA, installations must be in accordance with the current ANSI Z223.1/NFPA 54 and/or local codes having jurisdiction.

In Canada, please consult provincial and/or local authorities having jurisdiction for installations at elevations above 4,500 feet (1,370m).

Final Finishing

Noncombustible materials such as brick or tile can be extended over the edges of the face of the fireplace. Do not cover the window frame assembly, any vent, louvre assembly top or louvre assembly bottom. If a Trim Kit is to be installed, brick and tile will have to be installed flush with the side of this appliance.

Gas Line Installation

When purging gas line the front glass must be removed.

The gas pipeline can be brought in through the right side of the appliance. Knockouts are provided at convenient locations to allow for the gas pipe installa- tion and testing of any gas connection.

The gas line connection can be made with properly tinned 3/8" copper tubing, 1/2" rigid pipe or an approved flex connector. Since some municipalities have additional local codes, it is always best to consult your local authority and the CSA-B149.1installation codes. For USA installations consult the current National Fuel Gas Code, ANSI Z223.1/NFPA 54.

10006740

7

Image 7
Contents Direct Vent Model DVRT41 Table of Contents Locating Your Fireplace Installation & Operating InstructionsFraming Dimensions Fireplace Dimensions Installed as Top VentFireplace Dimensions Installed as Rear Vent Hearth Mantel ChartClearance to Combustibles MantelsGas Inlet and Manifold Pressures Gas SpecificationsGas Line Installation Framing And FinishingRemote ON/OFF Switch Installation Alternate Switch LocationEB-1 Electrical Box EB-1 receptacle Optional Top Vent ApplicationLocation of Vent Termination General VentingGeneral Venting Information Termination Location Canadian Installations1 US Installations2Flex Vent Pipes Canadian InstallationsUSA Installations General Information Assembling Vent PipesTwist Lock Pipes How to Use the Vent GraphRear Wall Vent Application Step Rear Wall Vent InstallationVertical Sidewall Application Rear Wall Vent Installations Flex Vent PipeMaximum vent run with elbows Total angular variation 270Always install horizontal venting on a level plane Vertical Sidewall Installation Twist Lock PipeStep Vertical Sidewall Installation Flex Vent PipeVertical Through-the-Roof Application Below Grade InstallationPlace firestop spacers and secure Vertical Through-the-Roof InstallationTypical Roof SupportTypical Ceiling ApplicationSupport Venting Components Operating Instructions Flame & Temperature Adjustment Installation of LogsLog Identification Chart Burner Lava Rock PlacementInspecting the Venting System Flame CharacteristicsSIT 820 Valve To Turn Off Gas To Heater Lighting and Operating InstructionsLighting Instructions Lighting & Operating InstructionsTurning Off the Gas to the Appliance Instructions for RF Comfort Control Valve Shut Off ProcedureTransmitter Operation Off Mode On Manual ModeChange Between F/C Temperature Units Delay Timer ModeAuto Mode Fan Override During Auto ModeAuto Path LED Count Service ActionOn Path Local PathWindow Frame Assembly to be Removed Before Service Work Troubleshooting Honeywell VS8421SIT Nova 820 Millivolt Valve Trouble Shooting the Gas Control SystemSIT 822 Valve with a Honeywell Electronic Igniter Troubleshooting the Gas Control SystemNova SIT820 Valve Burner and Pilot Orifice ConversionConversion Procedure Installation PrecautionsLogs may be hot Depressd and turn center plunger Burner and Burner Compartment MaintenanceCleaning the Standing Pilot Control System Logs May Be HOTDVRT41 Description DVRT41DVRT41 LP to Natural Gas Fuel Conversion Kits Natural Gas to LPHard Direct Wire Hook Up Optional Accessories AvailableFK12 Fan Assembly FK24 Fan AssemblyDecorative Frame Trim Remote ControlsCeramic Refractory Panels Decorative Bay WindowsConversion Instructions For Use in Mobile Homes Model DVRT41RMH9b.Units with Honeywell valve Limited Lifetime Warranty Model EnerGuide Ratings Efficiency RatingsState % Fireplace Efficiency % Fan-OFF Fan-ON

DVRT41 specifications

The Vermont Casting DVRT41 is a remarkable gas fireplace that harmoniously combines contemporary aesthetics with advanced heating technology. Designed to enhance any living space, the DVRT41 stands out with its impressive features and functionality, making it a popular choice for those looking to elevate their home environment.

One of the most notable features of the DVRT41 is its efficient heat output. With an impressive BTU range, this fireplace can warm spaces effectively while maintaining low emissions. This efficiency is complemented by Vermont Castings' commitment to sustainability, ensuring that the DVRT41 aligns with environmental considerations.

Aesthetically, the DVRT41 offers a customizable experience. Consumers can choose from various faceplate designs, glass door styles, and finishes to match any décor. The fireplace’s large viewing area provides an unobstructed view of the flames, creating a cozy atmosphere that’s perfect for gatherings or quiet evenings.

The DVRT41 incorporates advanced technologies aimed at maximizing user experience. The fireplace features an intuitive remote control for convenience, allowing users to adjust flame height and heat output easily. This adaptability ensures that homeowners can create the perfect ambiance at any time. The ignition system is designed for reliability and ease, ensuring that starting the fireplace is hassle-free, even in challenging conditions.

Safety is a top priority with the DVRT41. The unit includes features such as a safety shut-off system and a tempered glass front to prevent accidental burns. Additionally, the design allows for efficient venting, minimizing the risk of backdraft or buildup of harmful gases.

Maintenance is straightforward, thanks to the unit's design. The DVRT41 is constructed with durable materials that resist corrosion and wear, ensuring longevity and reduced upkeep costs. Regular cleaning is simple, ensuring that the fireplace remains functional and beautiful for years to come.

Overall, the Vermont Casting DVRT41 gas fireplace is not only a source of warmth but also a stunning focal point within any home. Its blend of efficiency, safety, and design flexibility make it a top choice for homeowners seeking an effective heating solution that doesn’t compromise on style or substance. The DVRT41 exemplifies Vermont Castings' commitment to quality, ensuring that every unit delivers exceptional performance and aesthetic appeal.