Empire Comfort Systems CHBR-16-3 installation instructions Cleaning and Servicing

Page 15

CLEANING AND SERVICING

Annual inspection and cleaning by your dealer or qualified service technician is recommended to prevent malfunction and/or sooting.

TURN OFF HEATER AND ALLOW TO COOL BEFORE CLEANING.

Remove logs, handling carefully by holding gently at each end. Gloves are recommended to prevent skin irritation from ceramic fibers. If skin becomes irritated, wash gently with soap and water. Refer to manual for correct log placement.

PERIODIC CLEANING – Refer to parts diagram for location of items discussed below.

•Do not use cleaning fluid to clean logs or any part of heater.

•Logs - brush with soft bristle brush or vacuum with brush attachment.

•Remove loose particles and dust from the burner areas, controls, piezo covers and grate. Don’t remove media from inside burner box.

•Inspect and clean burner air intake hole. Remove lint or particles with brush. Failure to keep air intake hole clean will result in sooting and poor combustion.

ANNUAL CLEANING/INSPECTION – Refer to parts diagram for location of items discussed below.

•Inspect and clean burner air intake hole. Remove lint or particles with vacuum or brush. Failure to keep air intake hole clean will result in sooting and poor combustion.

•Inspect and clean all burner ports.

•Inspect ODS pilot for operation and accumulation of lint at air intake holes.

•Verify flame pattern and log placement for proper operation.

•Verify smooth and responsive ignition of main burner.

•Check level of ceramic media in burner. Burner should be full, up to the level of openings in burner top.

Attention: Ceramic media that is dislodged from burner box during shipment can be replaced through openings in burner top. If settling of ceramic media occurs during shipment an additional bag of ceramic media, part number, 12389 can be ordered from Empire Comfort Systems, Inc.

16934-3-0806

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation Instructions Table of Contents Do not Tamper with Pilot Light Safety System Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASSpecifications IntroductionProduct Description Before you get started Installation on Rugs and TileWell Head Gas Installations General InformationUnusually Tight Construction Provisions for Adequate Combustion & Ventilation AIRClearances Recommended Gas Pipe Diameter Installing a New Main Gas CockPressure Testing of the Gas Supply System GAS SupplySET-UP Instructions Placement of Glowing Embers and Lava Rock Thermostat Operation Operation INSTRUCTIONS/FLAME AppearanceCHBR-16 Lighting Instructions For Your Safety Read Before LightingCleaning and Maintenance/Pilot Pilot Flame CharacteristicsTurn OFF Heater and Allow to Cool Before Cleaning Cleaning and ServicingMillivolt System WiringControl Panel Installation Check System OperationAppliance shuts off during use. Pilot stays on Gas odor even when control knob is in OFF positionHeater produces a whistling noise when main burner is lit Appliance produces unwanted odorsHOW to Order Repair Parts Parts ListParts View Service Notes

CHBR-16-3 specifications

Empire Comfort Systems CHBR-16-3 is a premier choice for heating solutions, particularly favored for its combination of efficiency and convenience. This model is designed to meet the heating needs of various spaces, from homes to commercial settings, ensuring warmth and comfort even in the coldest winter months.

One of the standout features of the CHBR-16-3 is its impressive heating capacity. With an output of up to 16,000 BTUs, this unit can efficiently heat large areas, making it ideal for living rooms, basements, or even open floor plans. The powerful heat output is further complemented by a thermally efficient design, allowing the unit to operate effectively while keeping energy consumption low.

The CHBR-16-3 utilizes advanced technologies to maintain consistent temperatures. Its built-in blower system ensures an even distribution of heat throughout the space, eliminating cold spots and creating a comfortable environment. This feature is particularly beneficial in larger areas where heat can often be unevenly distributed.

Installation and ease of use are also highlights of this model. The unit is designed for straightforward installation and can be integrated into existing heating systems with relative ease. Additionally, it is equipped with a user-friendly manual control, giving users the ability to adjust settings according to their preferences. Optional remote control capabilities are also available, allowing for added convenience, especially during colder weather.

Safety is another crucial aspect of the CHBR-16-3. The unit is designed with multiple safety features, including an automatic shut-off to prevent overheating and a sealed burner to reduce the risk of carbon monoxide exposure. This attention to safety ensures peace of mind for users, allowing them to enjoy the warmth without worry.

Durability is a hallmark of Empire Comfort Systems products, and the CHBR-16-3 is no exception. Constructed from high-quality materials, this heater is designed to withstand the rigors of regular use. With proper maintenance, users can expect a long lifespan from this heating appliance.

In summary, the Empire Comfort Systems CHBR-16-3 is an excellent heating solution that stands out for its efficiency, user-friendly features, safety measures, and durable construction. Whether for residential or commercial use, this model provides reliable warmth that enhances comfort during the cold months.
Top Page Image Contents