Maintenance
Figure 7 | Figure 8 |
Back
Ledge
Rear
Tab
Log Ember bed
Side Section
Upper Light Bulb Requirements
Quantity of two (2) clear chande- lier or candelabra bulbs with an
To replace the top light bulbs:
1.Locate the two upper bulbs inside the firebox at the top (Figure 8).
2.Examine the bulbs to determine which bulbs require replacement.
3.Hold the socket while unscrewing the bulb.
4.Hold the socket while screwing in the new bulb.
Glass Cleaning
The glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the clear door may
collect dust particles, these can be removed by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the clear door can be cleaned with a damp cloth. The clear door should be completely dried with a lint free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the clear door surface.
Fireplace Surface
Cleaning
Use a cloth dampened with warm water only to clean painted surfaces of the electric fireplace. Do not use abrasive cleaners.
15