Important Instructions
cause an electric shock or fire, or damage to the heater.
⑪To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
⑫All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable vapours.
⑬Do not modify the fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
⑭Avoid the use of an extension cord. Extension cords may overheat and cause a risk of fire.
If you must use an extension cord, the cord must be No. 14
AWG minimum size and rated no less than 1875 Watts.
⑮Do not burn wood or other materials in the fireplace.
⑯Do not strike the fireplace glass.
⑰Always use a certified electrician should new circuits or outlets be required.
⑱Always use properly grounded, fused and polarized outlets.
⑲Disconnect all power supply before performing any cleaning, maintenance or relocation of the unit.
⑳When transporting or storing the unit and cord, keep in a dry place, free from excessive vibration and store so as to avoid damage.
Warning: To prevent overheating, do not cover heater.
SAVE THESE Instructions
5