MHP manual Chimney Components, Vermont Castings EWF36A, 20005167

Vermont Castings EWF36A

Chimney Components

Component	Description	Model Number
Chimney Support	Used to support chimney for each of	TCS8A
	30’ vertical height and 6’ of angled chimney run	(8” flue)
Firestop	Required at each floor level and attic on	FS2A (8” straight flue)
	multi-story installation	FS6A (8” 30° inclined flue)
Attic Insulation Shield	Used to prevent insulation from coming in contact	FS2100HT
	with the chimney system.Required in Canada.
	Optional in U.S.
Traditional Top Housing	Top housing of simulated brick pattern	S20B
	available in red, tan or white. Appropriate	(single flue)
	adapter is required (8CA). Flashing included.
Housing Extension	Extends Traditional Top Housing on	202036
	steep pitched roofs	(single flue)
Contemporary Chase Top	Used to terminate chimney at the top of a	SLTS8
Termination	chase. Flashing is not included.
Contemporary Flashing		8-6-12 with 8” flue
	Required for Contemporary Round Top	0 to 6/12 pitch
	termination to prevent rain entry.	8-12-12 with 8” flue
		(6/12 to 12/12 pitch)
Chimney Sections		8” flue
		81 (1’ long)
	Used to build chimney systems.	818 (1¹⁄₂’ long)
		83 (3’ long)
		84 (4’ long)
Chimney Elbows	Used to develop offset chimney systems.
	Only 30° elbows are available. (Elbows	830A-2
	packed 2 per carton - upper and lower	(8” 30° flue)
	elbow set.)
Round Top Termination	Used to terminate chimney on the roof.	RLTS8
	Flashing not included.	(8” flue)
Extended Round Top Chase	Used to terminate chimney at the top of a	RLTS8L
Termination	chase. Adapter Kit included. Flashing not	(8” flue)
	included.

26 20005167