Regency Wraps S2400M Stove Assembly Prior to Installation, Airmate Assembly for F2400M, 815-555

Page 10

INSTALLATION

STOVE ASSEMBLY

PRIOR TO

INSTALLATION

Rear Heat Deflector

Pedestal Assembly

Assembly for F2400M

F2400M & S2400M

(815-555)

(020-915)

All units require either the pedestal or 4 legs at-

The rear heat deflector is supplied with the stove

and must be installed unless the optional airmate

tached to the base. The F2400M stove requires

hasbeenselected.Itstopstheheatradiatedfrom

either the Airmate or Rear Heat Defl ector on top

the flue collar from overheating the rear wall.The

ofthestove.Clearancestocombustiblematerials

rear heat defl ector is installed on top of the rear

vary depending on whether the airmate or rear

heat defl ector is installed, so be sure to check heat shield, as shown in Diagram 4.

the Minimum Clearances, Installation section.

 

Airmate Assembly for F2400M

(850-105)

1)The airmate sits on top of the stove with

the slots in the sides fi tting over the curved defl ector on the rear stove top. See diagram 1. Discard the Rear Heat Defl ector that is supplied with the unit, it is not required if the airmate is installed.

2) Center the airmate and push it forward to the front of the stove. The back of the airmate should be level with the back and sides of the rear heat shield. See Diagrams 2 & 3.

Diagram 4

S2400M Side Shield Adjustment

The left and right side shields are lowered for shipping and handling. It allows for a handhold on the top of the stove. Before placing in the Step Stove in its fi nal position, the side shields must be raised.

Loosenthescrewsontherearonthestove(3per side), slide the side panel up as far as possible and then secure by tightening the screws.

Diagram 1

Diagram 2

Diagram 3

1)For easier assembly, tip the stove on its back (onto a soft surface to prevent scratch- ing).

Hint: If you have chosen the Ash Drawer option, remove the ash dump cover plates before attaching the pedestal. See page 17 "Ashdrawer Kit Installation".

2)Remove the blanking plate if

a)youarenotinstallingoutsidecombustion air or

b)outside air is to be brought in from the rear of the stove.

3)Unscrew the 4 bolts in the under-side of the stove. Align the holes in the corners of the pedestal top with the corresponding holes in the base of the stove. Fasten using a bolt and washer for each corner.

4)Push the

Regency logo into the two holes in the front bottom left corner of the pedestal cover plate.

Note: Any paint touch up should be done prior to placing logo on pedestal.

5)If not using ash drawer, then cover plate must beinstalled.Ifusingashdrawer,thendisregard cover plate.

10

Regency Freestanding Woodstove

Image 10
Contents Freestanding Woodstove 01/18/07Regency Fireplace Product Modular PartsTable of Contents Safety Label Safety Label for F2400MSafety Label for S2400M 245Installation Unit DimensionsResidential Installation Modular Installation OptionsRoom AIR Residential Installation C Vent Single WallMinimum Clearance to Combustible Materials Medium S2400M Minimum Alcove Clearance to Combustible MaterialsFloor Protection Step StoveS2400M Side Shield Adjustment Stove Assembly Prior to InstallationAirmate Assembly for F2400M 815-555STEP-BY-STEP Chimney Connector Installation Leg and Bottom Shield AssemblyMasonry Fireplace Masonry ChimneyFactory Built Chimney Combustible Wall Chimney Connector PASS-THROUGHS Method a 12 304.8 mm Clearance to Combustible Wall MemberElevation Example a Recommended Heights for Woodstove FlueRecommended Flue Height Example bMobile Home Installation Installation Listed Components For Mobile Home InstallationFlue Baffle Secondary AIR Tube Installation Freestanding Stove F2400MGlass Installation Brick InstallationSTEP-BY-STEP Optional Accessories Installation Door HandleBlower/Fan Draft Control Operating InstructionsOperating Instructions First FireFAN Operation Safety GuidelinesSafety Precautions ASH DisposalMaintenance F2400M Stove Main Assembly Parts ListPart# Description Parts List S2400M Step Stove Main AssemblyPEDESTAL, Bottom Shield & LEG Options Firebrick Regency Freestanding Woodstove Warranty Warranty LifetimeInstaller Please complete the following information

F2400M, S2400M specifications

Regency Wraps has long been known for its innovative solutions in food packaging, and the F2400M and S2400M models are prime examples of this commitment to quality and efficiency. Both models are designed to meet the needs of the modern kitchen, catering to both professional chefs and home cooks alike.

The F2400M model is particularly notable for its robust construction and user-friendly interface. It features a powerful motor capable of handling various wrap materials including plastic, foil, and parchment. This versatility allows users to easily transition between different types of wrapping, making it suitable for a broad range of food preparation tasks. Additionally, the F2400M incorporates an adjustable cutter that provides precise slicing, ensuring that users can create the perfect wrap every time.

On the other hand, the S2400M is designed with efficiency in mind. This model boasts a sleek design that saves counter space while maintaining a powerful performance. The S2400M is equipped with a built-in storage compartment for wrap rolls, allowing operators to keep everything organized and easily accessible. One of its standout features is the automatic cutter, which enhances safety and reduces the risk of injury during the wrapping process.

Both models utilize advanced technology to improve their functionality. The thermal sensors in the F2400M help regulate the temperature, ensuring that wraps are sealed securely without compromising food quality. Meanwhile, the S2400M’s intuitive touch controls simplify the wrapping process, making it easier for users to achieve consistent results.

In terms of characteristics, both models are designed for durability. The heavy-duty materials used in their construction ensure that they can withstand the rigors of daily use, making them ideal for busy kitchens. Furthermore, they are both energy-efficient, helping users to minimize their environmental impact while keeping their operations cost-effective.

In summary, the Regency Wraps F2400M and S2400M are exceptional tools for anyone looking to streamline their food wrapping processes. With advanced features, user-friendly designs, and robust construction, these models represent the pinnacle of modern food packaging technology. Whether you’re a professional chef or a home cook, investing in either of these models will elevate your food preparation and storage experience.