Brick Installation, Door Handle, Screen Door

INSTALLATION

BRICK INSTALLATION

Firebrick is included to extend the life of your stove and radiate heat more evenly. Check to see that all ﬁ rebricks are in their correct posi- tions and have not become misaligned during shipping.

The "AD" brick in the drawings below is the brick covering the Ash Dump hole that is used when the Ash Drawer Kit is installed.

STEP-BY-STEP

OPTIONAL

ACCESSORIES

INSTALLATION

The pieces listed below can be purchased and installed during the initial installation or added on later.

4)Push the ash plug into the hole inside the ﬁ rebox and replace all the bricks except for the brick over the ash plug (see brick diagram in the Brick Installation section).

5)Place the ash plug tool beside the lid, then slide the ash drawer inside.

Refer to Ash Drawer Operating Guidelines in the Operating Instructions section.

DOOR HANDLE

Attach spring handle by rotating counter clock- wise onto rod. Ensure that the rod ﬁ ts into the entire length of the spring handle (refer to the Diagram below).

Pedestal Ash Drawer Kit (850-100)

1) Remove the bricks from the ﬂ oor of the

ﬁrebox.

2)If using ashdrawer, discard cover plate.

3)Remove the ash dump cover plates (one inside the ﬁ rebox and one on the underside of the ﬁ rebox) by removing the two nuts and boltsholdingthe2platestogetherfrominside the ﬁ rebox.

4)Push the ash plug into the hole inside the

ﬁrebox and replace all the bricks except for the brick over the ash plug (refer to the brick diagram in the Brick Installation section).

5)Place the ash drawer lid inside the pedestal, and the ash plug tool beside the lid, then slide the ash drawer inside so it sits on top of the lid.

SCREEN DOOR

Hook screen to the inside on the right side of the ﬁ rebox door opening. Lock in place by turning handle.

GLASS INSTALLATION

Remove the door from the stove and remove the glass retainer. Position the glass in the door, make sure that the glass gasketing will properly seal your unit, and replace the retainer, it should restonthegasketnottheglass.Tightensecurely, but do not wrench down on the glass as this may cause the glass to break.

Refer to the Ash Drawer Operating Guidelines in the Operating Instructions section.

Bottom Shield Ash Drawer Kit

(850-101 )

1) Remove the bricks from the ﬂ oor of the

ﬁ rebox.

2)Remove and discard the cover plate by removing the two screws on the front of the Bottom Shield.

3)Remove the ash dump cover plates (one inside the ﬁ rebox and one on the underside of the ﬁ rebox) by removing the two nuts and boltsholdingthe2platestogetherfrominside the ﬁ rebox.

Hooks

Handle Lock

Back Side of Screen Shown

NOTE: The handle must be positioned at 10 o'clock when closed to avoid the handle from getting hot and to ensure the screen stays in place.

Handle at 10 o'clock position.

Regency Freestanding Woodstove

F2400M, S2400M specifications

Regency Wraps has long been known for its innovative solutions in food packaging, and the F2400M and S2400M models are prime examples of this commitment to quality and efficiency. Both models are designed to meet the needs of the modern kitchen, catering to both professional chefs and home cooks alike.

The F2400M model is particularly notable for its robust construction and user-friendly interface. It features a powerful motor capable of handling various wrap materials including plastic, foil, and parchment. This versatility allows users to easily transition between different types of wrapping, making it suitable for a broad range of food preparation tasks. Additionally, the F2400M incorporates an adjustable cutter that provides precise slicing, ensuring that users can create the perfect wrap every time.

On the other hand, the S2400M is designed with efficiency in mind. This model boasts a sleek design that saves counter space while maintaining a powerful performance. The S2400M is equipped with a built-in storage compartment for wrap rolls, allowing operators to keep everything organized and easily accessible. One of its standout features is the automatic cutter, which enhances safety and reduces the risk of injury during the wrapping process.

Both models utilize advanced technology to improve their functionality. The thermal sensors in the F2400M help regulate the temperature, ensuring that wraps are sealed securely without compromising food quality. Meanwhile, the S2400M’s intuitive touch controls simplify the wrapping process, making it easier for users to achieve consistent results.

In terms of characteristics, both models are designed for durability. The heavy-duty materials used in their construction ensure that they can withstand the rigors of daily use, making them ideal for busy kitchens. Furthermore, they are both energy-efficient, helping users to minimize their environmental impact while keeping their operations cost-effective.

In summary, the Regency Wraps F2400M and S2400M are exceptional tools for anyone looking to streamline their food wrapping processes. With advanced features, user-friendly designs, and robust construction, these models represent the pinnacle of modern food packaging technology. Whether you’re a professional chef or a home cook, investing in either of these models will elevate your food preparation and storage experience.