Regency C33-LP3 General Vent Maintenance, Thermopile Thermocouple, Aeration Adjustment

Page 18

MAINTENANCE

CAUTION:ANY SAFETY SCREEN ORGUARDREMOVEDFORSERV- ICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERAT- ING THE APPLIANCE.

CLOTHING OR OTHER FLAM- MABLE MATERIAL SHOULD NOT BE PLACED ON OR NEAR THE APPLIANCE.

NEVEROPERATETHEAPPLIANCE WITHOUTTHEGLASSPROPERLY SECURED IN PLACE.

GENERAL VENT

MAINTENANCE

Conduct an inspection of the venting system at least annually. Recommended areas to inspect are:

1)Check areas of the Venting System which are exposed to the elements for corrosion. These will appear as rust spots or streaks, and in extreme cases, holes. These com- ponents should be replaced immediately.

2)Remove the Cap, and shine a fl ashlight down the Vent. Remove any birds nests, or other foreign material.

3)Check for evidence of excessive condensa- tion, such as water droplets forming in the liner, and subsequently dripping out the joints, Continuous condensation can cause corrosion of caps, pipe, and fi ttings. It may be caused by having excessive lateral runs, too many elbows, or exterior portions of the system being exposed to cold weather.

4)Inspect joints, to verify that no pipe sections or fi ttings have been disturbed, and conse- quently loosened. Also check mechanical supports such as Wall Straps for rigidity.

THERMOPILE /

THERMOCOUPLE

1)Loosen the thermocouple or thermopile with a 7/16" wrench at bracket.

2)Disconnect thermocouple by loosening nut from the valve with a 9mm wrench. Discon- nect thermopile by loosening 2 screws marked TP on the valve.

3)Drop the thermocouple or thermopile down from the bracket and pull it out of the unit.

4)Reinstall the new ones in reverse order.

AERATION

ADJUSTMENT

The aeration adjustment rod is attached to the air shutter on the burner. The air shutter adjust- ment rod is located under the ashlip on the right side. The rod is used to adjust the aeration on the burner. This adjustment is performed by the installer and is primarily used in installations at high elevations. Push the rod in for a yellow fl ame, or pull out on the rod for a bluer fl ame.

Air shutter opening:

 

Natural Gas

7/16"

Propane

Wide open

PILOT ADJUSTMENT

Periodically check the pilot flames. Correct flame pattern has three strong blue flames: 1 flowing around the thermopile, 1 around the thermocouple and 1 flowing across the burner (it does not have to be touching the burner).

Note: If you have an incorrect flame pat- tern, contact your Regency® dealer for further instructions.

Top View of pilot fl ame

Incorrectflamepatternwillhavesmall,prob- ably yellow flames, not coming into proper contact with the rear burner or thermopile or thermocouple.

Top View of pilot fl ame

Closed - Tall Yellow fl ame

Open - Short Blue fl ame

Caution: Carbon will be produced if air shut- ter is closed too much.

Note: Aeration Adjustment should only be performedbyanauthorizedRegency® Installer at the time of installation or service.

18

Regency® CLASSIC C33-3 Freestanding Gas Stove

Page 17 Page 19
Image 18
Page 17 Page 19
Contents C33 Classic Freestanding Gas Stove To the New Owner Table of Contents Safety Label Requirements MA Code CO DetectorInstallation Checklist InstallationGeneral Safety Information Before YOU StartClearances to Combustibles Optional FAN InstallationC33-3 Reference Dimensions This includesPedestal Assembly WiringOptional Outside AIR Draft HoodVenting System Data GAS Pipe Pressure TestingGAS Connection High ElevationWith Pedestal Installation DC SparkerValve With Bottom ShieldTest for LOG SET Flue Spillage Installation OperationRemote Wall Switch Safety LatchRemote Control Installation Wall Thermostat InstallationWiring Diagrams Normal Operating Sounds of GAS Appliances Shutdown Procedure Do Not Attempt To Clean The Glass While It is still hotOperating Instructions For Your Safety Read Before Lighting Copy of the Lighting Plate InstructionsAeration Adjustment MaintenanceGeneral Vent Maintenance Pilot AdjustmentClean any fingerprints off before turning the unit on LOG ReplacementGlass Replacement GOLD-PLATED DoorsRemoving Valve Assembly InstallingTo remove valve from valve assembly, continue Parts List Main AssemblyBurner & Logs Base Options Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Warranty ConditionsInstaller Please complete the following information

C33-NG3, C33-LP3 specifications

The Regency C33-NG3 and C33-LP3 are advanced gas fireplaces that reflect both elegance and functionality, making them ideal choices for those looking to enhance their living spaces. These models stand out in the market due to their exceptional design and innovative technology, catering to both natural gas and propane options.

One of the main features of the Regency C33-NG3 and C33-LP3 is their impressive heating capacity. Both models boast an efficiency rating that competently warms your space while maintaining eco-friendly operations. This makes them an attractive option for homeowners seeking a blend of luxury and sustainable heating solutions.

Both fireplace models are designed with a modern aesthetic, featuring a sleek front and expansive viewing area that allows the warm glow of flames to be the centerpiece of any room. With customizable trim options and the ability to add decorative media such as stones or glass, these fireplaces can be tailored to fit various interior designs. The contemporary linear design not only offers visual appeal but also maximizes the heat output, ensuring a cozy environment.

In terms of technology, the Regency C33-NG3 and C33-LP3 come equipped with an advanced electronic ignition system. This feature allows for easy lighting of the fireplace with the push of a button, eliminating the hassle associated with traditional ignition methods. Additionally, these models include a thermostatic control option, enabling users to maintain their desired temperature effortlessly.

The patented heat exchanger technology enhances the overall efficiency of both models, ensuring that the heat produced is directed into the room rather than being lost through the venting system. This innovative design contributes to a more efficient heating experience, making these fireplaces a cost-effective choice for consumers.

Safety is also a priority with the Regency C33-NG3 and C33-LP3. Both models incorporate safety barriers and advanced flame sensing technology, ensuring peace of mind during operation. The sleek glass front not only adds to the aesthetic but also keeps flames safely contained, making them suitable for families with children or pets.

In conclusion, the Regency C33-NG3 and C33-LP3 combine modern elegance with advanced heating technology. Their efficient heating capabilities, customizable designs, and user-friendly features make them standout choices for anyone looking to elevate their home’s ambiance while ensuring warmth and comfort.
Top Page Image Contents