Regency C33-LP3, C33-NG3 installation manual Removing Valve Assembly, Installing

Page 20

MAINTENANCE

REMOVING

VALVE ASSEMBLY

1) Shut off gas supply.

2) If optional fan is installed, disconnect power

source to stove.

3) Remove access panel.

a) Front panel on pedestal model. See diagram 1.

b) Panel from bottom of leg shield. See diagram 2.

Note: Access panel only has to be loos- ened to be taken out.

8)Ifoptionalfanisinstalled,removethermodisc tobracketbyremovingthree(3)phillipshead

M5 screws.

9) Remove front cover with Piezo Igniter by removing two (2) sheet metal screws.

10) Loosen four (4) phillips head M5 valve mounting screws from underside of fi rebox. Pushvalveassemblyforwardontheteardrop slots and drop down. Diagram 3.

16)Remove inlet pipe with pipe wrench. Note orientation of 90o elbow.

17)Remove two (2) phillips head M5 screws on each side of the valve.

18)Removevalveandremovegasout90o brass fi tting. Note orientation of fi tting.

INSTALLING

Diagram 1

Diagram 2

4)Disconnect gas line to stove.

5)Disconnect 3/8" NPT pipe from 90o elbow on valve.

6)Disconnect the two (2) switch wires from valve.

7)Remove two (2) orifice bracket screws inside fi rebox.

Diagram 3

11)Disconnect Piezo wire.

To remove valve from valve assembly, continue.

12)Remove two (2) thermopile wires.

13)Removethermocouplewitha9mm(metric) wrench.

14)Remove pilot nut with an 11 mm wrench.

15)Remove valve to orifi ce nut with a 13/16" wrench.

VALVE ASSEMBLY

1)To install a new valve assembly, reverse instructions for removing valve. See as- sembly steps 1-11.

2)Check for leaks and manifold pressure. See Gas Pressure Test instructions.

3)To reinstall valve, reverse instructions for removing valve assembly, steps 12-18.

20

Regency® CLASSIC C33-3 Freestanding Gas Stove

Image 20
Contents C33 Classic Freestanding Gas Stove To the New Owner Table of Contents Safety Label Requirements MA Code CO DetectorInstallation General Safety InformationInstallation Checklist Before YOU StartOptional FAN Installation C33-3 Reference DimensionsClearances to Combustibles This includesPedestal Assembly WiringVenting Optional Outside AIRDraft Hood GAS Pipe Pressure Testing GAS ConnectionSystem Data High ElevationInstallation DC Sparker ValveWith Pedestal With Bottom ShieldTest for LOG SET Flue Spillage Installation OperationSafety Latch Remote Control InstallationRemote Wall Switch Wall Thermostat InstallationWiring Diagrams Normal Operating Sounds of GAS Appliances Operating Instructions Shutdown ProcedureDo Not Attempt To Clean The Glass While It is still hot For Your Safety Read Before Lighting Copy of the Lighting Plate InstructionsMaintenance General Vent MaintenanceAeration Adjustment Pilot AdjustmentLOG Replacement Glass ReplacementClean any fingerprints off before turning the unit on GOLD-PLATED DoorsTo remove valve from valve assembly, continue Removing Valve AssemblyInstalling Parts List Main AssemblyBurner & Logs Base Options Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Warranty ConditionsInstaller Please complete the following information

C33-NG3, C33-LP3 specifications

The Regency C33-NG3 and C33-LP3 are advanced gas fireplaces that reflect both elegance and functionality, making them ideal choices for those looking to enhance their living spaces. These models stand out in the market due to their exceptional design and innovative technology, catering to both natural gas and propane options.

One of the main features of the Regency C33-NG3 and C33-LP3 is their impressive heating capacity. Both models boast an efficiency rating that competently warms your space while maintaining eco-friendly operations. This makes them an attractive option for homeowners seeking a blend of luxury and sustainable heating solutions.

Both fireplace models are designed with a modern aesthetic, featuring a sleek front and expansive viewing area that allows the warm glow of flames to be the centerpiece of any room. With customizable trim options and the ability to add decorative media such as stones or glass, these fireplaces can be tailored to fit various interior designs. The contemporary linear design not only offers visual appeal but also maximizes the heat output, ensuring a cozy environment.

In terms of technology, the Regency C33-NG3 and C33-LP3 come equipped with an advanced electronic ignition system. This feature allows for easy lighting of the fireplace with the push of a button, eliminating the hassle associated with traditional ignition methods. Additionally, these models include a thermostatic control option, enabling users to maintain their desired temperature effortlessly.

The patented heat exchanger technology enhances the overall efficiency of both models, ensuring that the heat produced is directed into the room rather than being lost through the venting system. This innovative design contributes to a more efficient heating experience, making these fireplaces a cost-effective choice for consumers.

Safety is also a priority with the Regency C33-NG3 and C33-LP3. Both models incorporate safety barriers and advanced flame sensing technology, ensuring peace of mind during operation. The sleek glass front not only adds to the aesthetic but also keeps flames safely contained, making them suitable for families with children or pets.

In conclusion, the Regency C33-NG3 and C33-LP3 combine modern elegance with advanced heating technology. Their efficient heating capabilities, customizable designs, and user-friendly features make them standout choices for anyone looking to elevate their home’s ambiance while ensuring warmth and comfort.