Regency C33-LP3, C33-NG3 installation manual Pedestal Assembly, Wiring

Page 8

INSTALLATION

Wiring

11)Remove the dummy plug from the right side of the bottom shield or pedestal and install the supplied fan switch.

12)Attach hot wire from power cord to the ther- modisc.

13)Slide the thermodisc under the bracket.

16)Pull power wire back and put strain relief grommet in place as per diagram 4.

17)Reverse steps 3-1 to complete installa- tion.

Note: The #8 ground lug is a dedicated ground for mobile home use only.

Only C34 unit is approved for mobile homes.

Caution: Ensure that wires do

NOT touch hot surfaces.

Fan Removal

PEDESTAL ASSEMBLY

1)Foreasierassembly,tipthestoveonitsback (preferably onto a soft surface to prevent scratching).

2)Unscrew the 4 bolts in the underside of the stove. Align the holes in the corners of the pedestal top with the corresponding holes in the base of the stove. Use washers which are supplied with the pedestal as shown in diagram. Reinstall bolts.

View from Bottom of Stove

14)Connecting wires to the 3 way switch -

a.Connect the red wire from the fan to the top of the 3 way switch.

b.Connect black wire from fan to the bottom of the 3 way switch.

c.Connect white jumper wire to middle of the three way switch. See wiring diagram below.

15)Connect white wire from fan motor to neutral on the power cord.

1)Disconnect the power to fan.

2)Allow the stove to cool to room tempera- ture.

3)Open the pedestal door and remove the screws on the door cover plate. Leg Units: Remove bottom access panel.

4)Loosen the nutsert screws.

5)Remove Fan Assembly from the key slots at the fan base. Take the fan out from the rectangular opening . Diagram 3.

6)Turn the fan around 90 degrees (Pedestal units only). Diagram 2.

7)Disconnect the green ground wires to the grounding lug.

8)Disconnect the white wire of the fan from the power cord.

9)Disconnect red wire and black wire (from fan to Fan Switch).

10)Take fan out from the stove body. Diagram

Diagram 1

3)Hook up wires to Burner ON/OFF switch and valve assembly (be careful not to pinch wires). See Diagram 1.

4)Push the Regency® logo into the two holes in the front bottom left corner of the pedestal cover plate.

Note: Any paint touch up should be done prior to placing logo on pedestal.

Wiring Diagram

8

Regency® CLASSIC C33-3 Freestanding Gas Stove

Image 8
Contents C33 Classic Freestanding Gas Stove To the New Owner Table of Contents Safety Label Requirements MA Code CO DetectorInstallation General Safety InformationInstallation Checklist Before YOU StartOptional FAN Installation C33-3 Reference DimensionsClearances to Combustibles This includesPedestal Assembly WiringVenting Optional Outside AIRDraft Hood GAS Pipe Pressure Testing GAS ConnectionSystem Data High ElevationInstallation DC Sparker ValveWith Pedestal With Bottom ShieldTest for LOG SET Flue Spillage Installation OperationSafety Latch Remote Control InstallationRemote Wall Switch Wall Thermostat InstallationWiring Diagrams Normal Operating Sounds of GAS Appliances Operating Instructions Shutdown ProcedureDo Not Attempt To Clean The Glass While It is still hot For Your Safety Read Before Lighting Copy of the Lighting Plate InstructionsMaintenance General Vent MaintenanceAeration Adjustment Pilot AdjustmentLOG Replacement Glass ReplacementClean any fingerprints off before turning the unit on GOLD-PLATED DoorsTo remove valve from valve assembly, continue Removing Valve AssemblyInstalling Parts List Main AssemblyBurner & Logs Base Options Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Regency Classic C33-3 Freestanding Gas Stove Warranty ConditionsInstaller Please complete the following information

C33-NG3, C33-LP3 specifications

The Regency C33-NG3 and C33-LP3 are advanced gas fireplaces that reflect both elegance and functionality, making them ideal choices for those looking to enhance their living spaces. These models stand out in the market due to their exceptional design and innovative technology, catering to both natural gas and propane options.

One of the main features of the Regency C33-NG3 and C33-LP3 is their impressive heating capacity. Both models boast an efficiency rating that competently warms your space while maintaining eco-friendly operations. This makes them an attractive option for homeowners seeking a blend of luxury and sustainable heating solutions.

Both fireplace models are designed with a modern aesthetic, featuring a sleek front and expansive viewing area that allows the warm glow of flames to be the centerpiece of any room. With customizable trim options and the ability to add decorative media such as stones or glass, these fireplaces can be tailored to fit various interior designs. The contemporary linear design not only offers visual appeal but also maximizes the heat output, ensuring a cozy environment.

In terms of technology, the Regency C33-NG3 and C33-LP3 come equipped with an advanced electronic ignition system. This feature allows for easy lighting of the fireplace with the push of a button, eliminating the hassle associated with traditional ignition methods. Additionally, these models include a thermostatic control option, enabling users to maintain their desired temperature effortlessly.

The patented heat exchanger technology enhances the overall efficiency of both models, ensuring that the heat produced is directed into the room rather than being lost through the venting system. This innovative design contributes to a more efficient heating experience, making these fireplaces a cost-effective choice for consumers.

Safety is also a priority with the Regency C33-NG3 and C33-LP3. Both models incorporate safety barriers and advanced flame sensing technology, ensuring peace of mind during operation. The sleek glass front not only adds to the aesthetic but also keeps flames safely contained, making them suitable for families with children or pets.

In conclusion, the Regency C33-NG3 and C33-LP3 combine modern elegance with advanced heating technology. Their efficient heating capabilities, customizable designs, and user-friendly features make them standout choices for anyone looking to elevate their home’s ambiance while ensuring warmth and comfort.